65049
34
Zoom out
Zoom in
Previous page
1/44
Next page
USING OPTIONAL EQUIPMENT
30 En
4 Press and hold BLUETOOTH ON for more than 3 seconds to start pairing.
“Searching...” appears when the pairing starts. While the Yamaha Bluetooth audio receiver is in pairing mode, the
DOCK indicator flashes in the front panel display.
y
To cancel the pairing, press BLUETOOTH OFF.
5 Check that the Bluetooth component detects the Yamaha Bluetooth audio receiver.
If the Bluetooth component detects the Yamaha Bluetooth audio receiver, the audio receiver name (“YBA-10
YAMAHA” for example) appears in the device list of the Bluetooth component.
6 Select the Yamaha Bluetooth audio receiver in the device list of the Bluetooth component, and
then enter the pass key “0000” on the Bluetooth component.
When the pairing procedure is successful, “Completed” appears in the front panel display.
y
If the pairing is not completed within 8 minutes, “Not found” appears and the DOCK indicator is turned off in the front panel
display.
If the pairing is canceled during the pairing, “Canceled” appears in the front panel display.
The Yamaha Bluetooth audio receiver can be paired with up to eight Bluetooth components. When pairing is conducted successfully
with a ninth component and the pairing data is registered, the pairing data for the least recently used another component is deleted.
Establishing a connection
After the pairing is completed, perform the connecting operation on the system or on the Bluetooth component to enable
communication between them. The connecting operation on the system is only available for the most recently connected
Bluetooth component.
1 Press DOCK to set the input to DOCK.
2 Press BLUETOOTH ON to start a connection. “Searching...” appears in the front panel display.
When the system finds the last connected Bluetooth component, “BT connected” appears in the front panel display
for 3 seconds.
y
If the system cannot find the last connected Bluetooth component, “Not found” appears in the front panel display.
If you want to establish a connection with a Bluetooth component other than the one most recently connected to, connect from
that Bluetooth component. Refer to the instruction manual of your Bluetooth component for details.
Disconnecting
Press DOCK, and then BLUETOOTH OFF to disconnect the system from the Bluetooth
component.
“Disconnected” appears in the front panel display.
Playing back the Bluetooth component
You can play back your Bluetooth component using the supplied remote control.
You can also play back your Bluetooth component by operating it directly.
y
Operation using the remote control is available only when the connection is established between the Bluetooth component you want to
play back and the system.
Note
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YAS-71 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YAS-71 in the language / languages: English as an attachment in your email.

The manual is 6,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info