516964
75
Zoom out
Zoom in
Previous page
1/114
Next page
Informazioni supplementari
9 It
Italiano
Utilizzare il telecomando del televisore per controllare
l’unità potrebbe essere difficile se l’unità è posizionata in
modo da nascondere il sensore del televisore quando è
collocata sotto il televisore. Provare le due soluzioni
indicate di seguito per risolvere il problema.
1 Muovere l’unità in tutte le direzioni.
2 Rimuovere i supporti per ridurre l’altezza
dell’unità.
Conservare i supporti e le viti in un posto sicuro per poterli
riutilizzare in futuro.
Se non è stato possibile risolvere il problema con i
suggerimenti indicati sopra, attenersi alla procedura
riportata di seguito e servirsi della funzione di trasmissione
del segnale dal telecomando del TV che trasmette il segnale
del telecomando del TV ricevuto davanti all’unità al sensore
del telecomando del TV tramite l’IR flasher collocato sul
retro dell’unità.
1 Impostare l’unità in modalità di attesa.
2 Premere entrambi i pulsanti VOLUME + e
dell’unità principale, rilasciare prima il
pulsante , quindi rilasciare il pulsante
VOLUME +.
L’unità viene accesa quando si attiva/si disattiva la
funzione di trasmissione del segnale dal telecomando
del TV.
La spia CLEAR VOICE si illumina come
nell’illustrazione seguente. Verificare che
l’impostazione sia corretta. ( P. 11)
L’impostazione predefinita è off.
È possibile verificare l’impostazione corrente
riaccendendo nuovamente l’unità dalla modalità di
attesa.
Muovere nuovamente l’unità in tutte le direzioni, se il
controllo dell’unità con il telecomando del televisore
permane difficoltoso.
La funzione di trasmissione del segnale dal telecomando
del TV è attivata anche se l’unità è in modalità di attesa.
È possibile utilizzare il telecomando del televisore
esclusivamente dopo aver completato la procedura di
apprendimento del telecomando del televisore con l’unità.
Tramite il telecomando del televisore è possibile
utilizzare le funzioni seguenti.
Riduzione del volume
Aumento del volume
Accensione/modalità di attesa
y
I telecomandi di alcuni televisori potrebbero non controllare
queste funzioni. In questo caso, utilizzare il telecomando in
dotazione con l’unità.
1 Impostare l’unità e il televisore in
modalità di attesa.
2 Premere entrambi i pulsanti INPUT e
dell’unità principale, rilasciare prima il
pulsante , quindi rilasciare il pulsante
INPUT.
L’unità entra nella modalità di
apprendimento del telecomando.
Il controllo tramite il telecomando del
televisore è difficile (con l’unità
posizionata sotto il televisore)
Nota
Utilizzo della funzione di trasmissione
del segnale dal telecomando del TV
Utilizzare un
cacciavite a croce
per rimuovere le viti.
Senza i supporti,
l’unità si abbassa di
19 mm.
Il sensore del
telecomando del
televisore
IR flasher
On Off
Spia CLEAR
VOICE (per
2 secondi dopo
l’accensione
dell’unità)
Note
Controllo dell’unità tramite il
telecomando del televisore (funzione
di apprendimento del telecomando del
televisore)
Nessuna luce Verde
Lampeggia
in rosso
Continua nella pagina seguente.
\
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YAS-101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YAS-101 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info