689861
336
Zoom out
Zoom in
Previous page
1/363
Next page
Chapter 8 Part B Electrical system (XV700-1100 models)
-8B-15
28.6 Hold the thrust collar in with a flat steel ruler or similar
tool while installing the cover
28.11 Remove the rotor retaining nut and washer
Install the cover and tighten the Allen bolts evenly, in a criss-cross
pattern, to the torque listed in this Chapter's Specifications.
Stator
Refer to illustration 28.8
7 Remove the alternator cover as described above.
28.12a Take off the rotor together with the intermediate gear
28.8 Alternator rotor and stator details
1 Rotor
2 Stator
3 Bolt
4 Pickup coils (dual
pickup model shown)
5 Pickup coil screws
6 Washers
7 Pickup coil screws
(alternate locations)
8 Washers
8 Remove the stator screws and take the stator out (see
illustration).
9 Installation is the reverse of the removal steps. Tighten the stator
screws securely.
Rotor
Refer to illustrations 28.11, 28.12a, 28.12b, 28.13a, 28.13b and 28.13c
10 Remove the alternator cover as described above.
11 Shift the transmission into gear and have an assistant apply the
rear brake. Remove the rotor nut and washer (see illustration).
12 Thread a rotor puller such as Yamaha tool no. YU-33270 into the '
rotor. Remove the rotor from the end of the crankshaft and take the
Woodruff key out of its slot (see illustrations). Note: Don't take the
intermediate gear off the back of the rotor unless the gear or rotor is to
be replaced.
28.12b Remove the Woodruff key from the crankshaft
336


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha XV920 Virago at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha XV920 Virago in the language / languages: English as an attachment in your email.

The manual is 52,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info