689860
30
Zoom out
Zoom in
Previous page
1/363
Next page
Chapter 1 Tune-up and routine maintenance
1-3
Viscosity
Consistently below 15 degrees C (60 degrees F) SAE 10W30
Consistently above 5 degrees C (40 degrees F) SAE 20W40
Capacity
With filter change 2.8 liters (3.0 US qt, 5.0 Imperial pt)
Oil change only 2.6 liters (2.7 US qt, 4.6 Imperial pt)
Brake fluid .. DOT 4
Final gear
Type SAE 80 API GL-4 hypoid gear oil
Capacity 0.19 liters (0.2 US qt, 0.34 Imp pt
Wheel bearings Medium weight, lithium-based multi-purpose grease
Swingarm pivot bearings . Medium weight, lithium-based multi-purpose grease
Cables and lever pivots Chain and cable lubricant or 10W30 motor oil
Sidestand/centerstand pivots Chain and cable lubricant or 10W30 motor oil
Brake pedal/shift lever pivots Chain and cable lubricant or 10W30 motor oil
Throttle grip Multi-purpose grease or dry film lubricant
'In the UK, tread depth must be at least 1 mm over 3/4 of the tread breadth all the way around the tire, with no bald patches.
1981 through 1983 XV750 through 1000 models and all TR1
Engine
Spark plugs
Type NGK BP7ES or ND W22EP-U
Gap... 0.7 to 0.8 mm (0.028 to 0.032 inch)
Valve clearances (COLD engine)
Intake 0.10 mm (0.004 inch)
Exhaust 0.15 mm (0.006 inch)
Engine idle speed .. 950 to 1050 rpm
Cylinder compression pressure (at sea level)
XV750 and TR1 Not specified
XV920 . 9.30 Bars (135 psi) at 300 rpm
Carburetor synchronization
Vacuum at idle speed " 180 +/-10 mm Hg (7.09 +/- 0.4 inch Hg)
Maximum vacuum difference between cylinders 10 mm Hg (0.4 inch Hg)
Cylinder numbering (from rear to front of bike) 1-2
Miscellaneous
Brake pedal position Not specified
Shift pedal position Not specified
Freeplay adjustments
Throttle grip Not specified
Clutch lever 2 to 3 mm (0.08 to 0.12 inch)
Front brake lever 5 to 8 mm (0.20 to 0.30 inch)
Rear brake pedal 20 to 30 mm (0.8 to 1.2 inches)
Battery electrolyte specific gravity 1.280 at 20-degrees C (68-degrees F)
Minimum tire tread depth* 1 mm (0.04 inch)
Tire pressures (cold)
XV750, XV920 K and MK
Front
Up to 90 kg (198 lbs) load 1.79 Bars (26 psi)
90 to 160 kg (198 to 353 lbs) load 1.93 Bars (28 psi)
High speed riding 2.20 Bars (32 psi)
Rear
Up to 90 kg (198 lbs) 1.93 Bars (28 psi)
90 to 160 kg (198 to 353 lbs) 2.48 bars (36 psi)
High speed riding 2.20 Bars (32 psi)
XV920J
Front'
Up to 90 kg (198 lbs) load 1.79 Bars (26 psi)
90 to 213 kg (198 to 470 lbs) load 1.93 Bars (28 psi)
High speed riding 2.20 Bars (32 psi)
Rear
Up to 90 kg (198 lbs) 1.93 Bars (28 psi)
90 to 213 kg (198 to 470 lbs) 2.76 bars (40 psi)
High speed riding 2.48 Bars (36 psi)
30


Need help? Post your question in this forum.

Forumrules
1

Forum

yamaha-xv750-virago

Reset search

  • Hi am Gavin from Napier, New Zealand- Does anyone know the correct clearance between the clutch basket bush and the gearbox input shaft on my 1990 Yamaha Virago xv 750 please? Submitted on 12-12-2021 at 00:03

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha XV750 Virago at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha XV750 Virago in the language / languages: English as an attachment in your email.

The manual is 52,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info