514325
208
Zoom out
Zoom in
Previous page
1/232
Next page
6-39
REAR SHOCK ABSORBER
2. Install:
Stopper ring (upper bearing) "1"
After installing the stopper ring, push
back the bearing until it contacts the
stopper ring.
3. Install:
Lower bearing "1"
Install the bearing by pressing it on
the side having the manufacture's
marks or numbers.
INSTALLING THE SPRING (REAR
SHOCK ABSORBER)
1. Install:
Spring "1"
Upper spring guide "2"
Lower spring guide "3"
2. Tighten:
•Adjuster "1"
3. Adjust:
Spring length (installed)
Refer to "ADJUSTING THE
REAR SHOCK ABSORBER
SPRING PRELOAD" section in
the CHAPTER 3.
4. Tighten:
Locknut "1"
INSTALLING THE REAR SHOCK
ABSORBER
1. Install:
Dust seal "1"
O-ring "2"
Collar "3"
Apply the molybdenum disulfide
grease on the dust seal lips and col-
lars.
Apply the lithium soap base grease
on the O-rings.
2. Install:
Bushing "1"
Collar "2"
Dust seal "3"
Apply the molybdenum disulfide
grease on the bearing and dust seal
lips.
Install the dust seals with their lips
facing inward.
3. Install:
Rear shock absorber
4. Install:
Bolt (rear shock absorber-frame)
"1"
Washer "2"
Nut (rear shock absorber-frame)
"3"
Apply the molybdenum disulfide
grease on the bolt.
5. Install:
Bolt (rear shock absorber-relay
arm)"1"
Nut (rear shock absorber-relay
arm) "2"
Apply the molybdenum disulfide
grease on the bolt.
6. Install:
Rear frame "1"
Bolt [rear frame (upper)] "2"
Bolt [rear frame (lower)] "3"
Installed depth of the
bearing "a":
4 mm (0.16 in)
Nut (rear shock absorb-
er-frame):
56 Nm (5.6 m•kg, 40
ft•lb)
Nut (rear shock absorb-
er-relay arm):
53 Nm (5.3 m•kg, 38
ft•lb)
Bolt [rear frame (upper)]:
38 Nm (3.8 m•kg, 27
ft•lb)
Bolt [rear frame (lower)]:
32 Nm (3.2 m•kg, 23
ft•lb)
208


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha WR 250 - 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha WR 250 - 2013 in the language / languages: English as an attachment in your email.

The manual is 14,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha WR 250 - 2013

Yamaha WR 250 - 2013 User Manual - German - 238 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info