588964
42
Zoom out
Zoom in
Previous page
1/63
Next page
40
1.2.1.3 Program change
When a voice is selected, the bank select and program change is transmitted
according to the following chart.
1.2.2.3 Program Change
When a program change message is received, the W5/W7 performs the
operations below. Three types of reception modes can be set with the System
Setup.
In Store Mode and Voice Edit Mode program changes will not be received.
1) Off: Program changes will not be received.
2) Ignore Bank Select: Individual program number (001 ~ 128) change
messages will be received but bank select messages will be ignored.
3) On: Bank select and program change messages will be received according to
the following chart.
BANK SELECT $Bn , $00 ,$00
$7F (MSB)
$Bn , $20 ,$00 $7F (LSB)
PROGRAM CHANGE $Cn , $00 $7F
*1: PGM CNG No.= 1($00) Voice number=D01
9($08) Voice number=D02
17($10) Voice number=D03
25($18) Voice number=D04
26($19) Voice number=D05
33($20) Voice number=D06
41($28) Voice number=D07
49($30) Voice number=D08
*2: PGM CNG No.= 1($00),2($01) Voice number=D01,D02
If program change is not specified as outlined above, MSB will be ignored.
When MSB is not 0 or 1 and LSB is not 0, Bank Off will be designated, and no
sound will be produced.
When Bank=off and bank select and program change messages are received,
voices will change accordingly.
If a drum voice bank select message is received and the program change
number is outside of the range, the bank will change to the selected bank and
the drum voice number will change to the previously selected drum voice
number within the bank. The default=0.
1.2.2.4 Pitch Bend
Pitch bend is received only by the MSB.
1.2.2.5 Aftertouch
Aftertouch is received in accordance with the reception channel of each mode.
1.2.2.6 Channel Mode message
1.2.2.7 RPN (Registered Parameter Number)
GM
PRESET
INTERNAL
SONG
EXTERNAL
GM
PRESET
INTERNAL
SONG
EXTERNAL
Normal Voice
Drum Voice
Bank No. MSB / LSB
0($00) / 0($00)
1($01) / 0($00)
2($02) / 0($00)
3($03) / 0($00)
4($04) / 0($00)
127($7F) / 0($00)
17($11) / 0($00)
18($12) / 0($00)
19($13) / 0($00)
20($14) / 0($00)
PGM CNG No.
1 128($00 $7F)
*1
*2
*2
*2
*2
GM
PRESET
INTERNAL
SONG
EXTERNAL
GM
PRESET
INTERNAL
SONG
EXTERNAL
Normal Voice
Drum Voice
Bank No. MSB / LSB
0($00) / 0($00)
1($01) / 0($00)
2($02) / 0($00)
3($03) / 0($00)
4($04) / 0($00)
127($7F) / 0($00)
17($11) / 0($00)
18($12) / 0($00)
19($13) / 0($00)
20($14) / 0($00)
PGM CNG No.
1 128($00 $7F)
*1
*2
*2
*2
*2
RPN
MSB LSB
$00 $00
$00 $01
$00 $02
$7F $7F
Data Entry
MSB LSB
$mm ---
$mm $ll
$mm ---
--- ---
data range
0..12
-8192..+8191
-63..+63
($28..$58)
don't care
parameter
Pitch Bend Sensitivity
Fine Tune
(mm,ll):($00,$)..($7F,$7F)
Course Tune
RPN reset
BANK SELECT $Bn , $00 ,$00 $7F (MSB)
$Bn , $20 ,$00 $7F (LSB)
PROGRAM CHANGE $Cn , $00 $7F
*1: Voice number=D01 D08 PGM CNG No.= 1($00);D01
9($08);D02
17($10);D03
25($18);D04
26($19);D05
33($20);D06
41($28);D07
49($30);D08
*2: Voice number=D01,D02 PGM CNG No.= 1($00),2($01)
When program change mode is on, bank select and program change will transmit.
When program change mode is “off”, bank select and program change will not
transmit.
When “ignore bank select” is specified, bank select will not transmit.
1.2.1.4 Pitch Bend
Pitch bend is transmitted with a resolution of 7 bits.
1.2.1.5 Aftertouch
Aftertouch is transmitted via MIDI according to realtime control.
1.2.1.6 Channel Mode Message
Channel mode message is not transmitted.
1.2.2 Reception
1.2.2.1 Note on/off
Reception note range = C-2
G8
Velocity range = 0
127
1.2.2.2 Control change
Parameters in the table below can be controlled by MIDI.
data rng
0 127
0 127
0 127
0 127
0 127
0 127
0 127
0 127
0 127
0 127
0 127
0 127
0 127
0 127
0 , 127
parameter
Bank Select MSB
Bank Select LSB
Modulation wheel
Foot control
Data Entry
Inst Volume
Pan
Expression
Portament Control
EF Send 1 (Reverb)
EF Send 2 (Chorus)
EF Send 3 (Delay/Rev)
MIDI Control 1
MIDI Control 2
Sustain Switch
cntrl#
0
32
1
4
6
7
10
11
84
91
93
94
1 119
1 119
64
*1
*1
*1: See Program Change 1.2.1.3
cntrl#
120
121
123
parameter
All Sound Off
Reset All Controller
All Notes Off
data rng
0
0
0
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha W7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha W7 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha W7

Yamaha W7 User Manual - English - 38 pages

Yamaha W7 User Manual - English - 170 pages

Yamaha W7 User Manual - German - 39 pages

Yamaha W7 User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info