588961
109
Zoom out
Zoom in
Previous page
1/193
Next page
106
Feature Reference
Edit Mode
Signal Select
Normal, Breath Noise Amp., Flow Rate Saturation, Beat, Slit/Friction, Reed.
Selects the signal to be used by the carrier or modulator.
This is the total output of the instrument model: a mix of the driver,
pipe/string, and tap signals.
This signal represents the instantaneous amplitude of the breath noise
produced at the driver. It is basically a highly distorted version of the
Slit/Friction signal described below.
When the pressures on either side of an aperture (e.g. a mouthpiece/
reed assembly) differ, a corresponding flow of air is produced. There is,
however, a limit to the speed of the airflow which can be produced
(saturation). The relationship between the pressure difference and
resulting airflow is derived as the Flow Rate Saturation signal.
The beat signal represents contact between the vibrating reed and the
mouthpiece.
As the reed vibrates, the area of gap (slit) between it and the mouth-
piece varies accordingly. The Slit/Friction signal corresponds to the
varying are of the reed/mouthpiece slit.
This signal is derived directly from the flexing of the reed.
Normal
Breath Noise
Amplitude
Flow Rate Satura-
tion
Beat
Slit/Friction
Reed
HPF Cutoff
17.0 Hz 11.2 kHz.
Both the modulator and carrier blocks have high-pass filters that can be used to roll
off the low frequencies of the corresponding signal. This parameter sets the cutoff fre-
quency of the carrier or modulator high-pass filter.
Over Drive
0.063 15.31.
This parameter boosts the corresponding modulator or carrier signal, forcing it into
distortion and thereby drastically changing its harmonic structure. The higher the value
the greater the distortion. No distortion is produced below a setting of “1.0”.
Level (Carrier only)
0 127.
Sets the output level of the carrier. The higher the value the greater the output level.
Balance
-64 63.
Sets the balance between the “wet” (the output of the harmonic enhancer) and “dry”
(the direct signal) signals. The higher the value the more “wet” the signal, and therefore
the more pronounced the harmonic enhancer effect. The carrier and modulator page
Balance” parameters are linked.
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha VL7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha VL7 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha VL7

Yamaha VL7 User Manual - English - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info