588960

Yamaha VL1-m Manual

113
Zoom out
Zoom in
Previous page
1/195
Next page
109
Feature Reference
●
Edit Mode
●
Phase (Modulator only)
≤0deg … 360deg.
This parameter is provided for the modulator block only. It allows a degree of
timbral variation by varying the phase of the modulator signal through 360 degrees in 2-
or 3-degree increments.
●
Index (Modulator only)
≤0 … 127.
Determines how much modulation is applied to the carrier signal (i.e. the level of
the modulator signal applied to the carrier). The higher the value the greater the modula-
tion.
Notes On Using the Harmonic Enhancer
Although any modulator source signal can be applied to any carrier
source signal, two approaches are recommended when attempting to create
an acoustic instrument simulation.
The first is to set the carrier signal to “Normal” and the modulator
signal to any other than normal, set the dry/wet “Balance” to 63 (all wet),
and set a relatively high “Index” value. In this case the total output of the
instrument model (“Normal” signal) will by modulated by one of the
component signals, so the dry/wet “Balance” can be set to fully wet
(carrier output only) since the carrier source and dry signals are essentially
the same. The Index parameter determines how much modulation is
applied, so a higher value is generally required to create sufficient variation.
The second approach is to set the carrier signal to any other than
normal and the modulator signal to any of the six possibilities, set the dry/
wet “Balance” to a more central value, and set a relatively low “Index”
value. In this situation it is necessary to set the “Balance” more toward
the “Dry” side since the carrier source signal is not the normal signal and
at least some of the dry signal is necessary to provide the basic sound of
the instrument model. In other words, the sound produced by the Harmonic
Enhancer is simply added to the basic sound of the instrument, in contrast
with the first approach in which the basic sound of the instrument is modu-
lated directly.
Please note that these are only guidelines, and are by no means the
only way to work with the Harmonic Enhancer. Since the Harmonic En-
hancer tends to respond differently with different instrument models,
experimentation and experience are your most valuable tools.
Element Modifier
… 113 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha VL1-m at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha VL1-m in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha VL1-m

Yamaha VL1-m User Manual - English - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info