689855
328
Zoom out
Zoom in
Previous page
1/363
Next page
Chapter 8 Part B Electrical system (XV700-1100 models) 8B-7
13.4a Instrument cluster (XV750, XV920 K
and MK) - exploded view
1 Speedometer
2 Wiring harness
3 Bulb
4 Tachometer
5 Wiring harness
6 Bulb
7 Instrument top cover
8 Speedometer lower cover
9 Tachometer lower cover
10 Bracket
11 Grommet
12 Rubber damper
13 Washer
14 Nut
15 Screw
16 Mounting bracket
17 Screw
18 Lockwasher
19 Washer
20 Screw
21 Lockwasher
22 Washer
23 Nut
24 Lockwasher
25 Washer
26 Speedometer cable
27 Bolt
terminal of the switch, then pull the brake lever or depress the brake
pedal - if the test light doesn't light up, replace the switch.
4 If the test light does light, check the wiring between the switch and
the brake lights (see the wiring diagrams at the end of this Chapter).
Switch replacement
Front brake lever switch
5 This is the same as for XV535 models. Refer to Part A of this
Chapter.
Rear brake pedal switch
Refer to illustration 12.7
6 Unplug the electrical connector in the switch harness.
7 Unhook the switch spring (see illustration).
8 Either compress the retainer prongs and slide the switch and its
adjusting nut out of the bracket or unscrew the switch completely from
the adjusting nut (see illustration 12.7).
9 Install the switch by reversing the removal procedure, then adjust
the switch by following the procedure described in Chapter 1.
13 Speedometer and cable - removal and installation
Speedometer cable removal
Refer to illustrations 13.1, 13.2a and 13.2b
1 Unscrew the speedometer cable end and pull the cable from the
speedometer (see illustration). If necessary for access, lower the
headlight assembly (see Section 9).
2 Note how it's routed, then detach the speedometer cable from
the drive gear at the left front fork. On early XV750 models, remove the
cable retaining bolt and detach the cable from the guide (see
illustration). On all others, unscrew the knurled nut from the
speedometer drive unit (see illustration).
Speedometer removal
Refer to illustrations 13.4a, 13.4b, 13.4c and 13.6
3 Disconnect the cable from the speedometer (see illustration 13.1).
4 Remove the mounting fasteners and detach the speedometer
housing or instrument cluster (see illustrations).
328


Need help? Post your question in this forum.

Forumrules
1

Forum

yamaha-virago-xv1100

Reset search

  • how can I manually acutuate the engine pistons on my 1998 XV1100 Yamaha XV1100? Submitted on 3-10-2022 at 19:35

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha Virago XV1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha Virago XV1100 in the language / languages: English as an attachment in your email.

The manual is 52,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha Virago XV1100

Yamaha Virago XV1100 User Manual - English - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info