516950
19
Zoom out
Zoom in
Previous page
1/168
Next page
17 En
TROUBLESHOOTING
English
CD playback
Problem Cause Solution
CD cannot be inserted. Another disc is already inserted. Unload the disc with EJECT.
You are attempting to insert a disc that cannot be
used by this unit.
Use a disc supported by the unit ( P. 18).
Some button operations do not
work.
The disc loaded into the unit may not be
compatible.
Use a disc supported by the unit ( P. 18).
Playback does not start
immediately after pressing
(playback stops immediately.).
The disc may be dirty. Wipe the disc clean.
The disc loaded into the unit may not be compatible.
Use a disc supported by the unit ( P. 18).
If the unit was moved from a cold to warm place,
condensation may have formed on the disc
reading lens.
Wait for an hour or two until the unit adjusts to the room
temperature, and try again.
When you insert a disc, the front
panel display indicates “No Disc”
or “CD Unknown.”
The disc loaded into the unit may not be
compatible.
Use a disc supported by the unit ( P. 18).
The disc may be dirty, or a foreign object may
have adhered to it.
Wipe the disc clean. Alternatively, remove any foreign
object that has adhered to the disc.
The disc does not contain playable files. Use a disc containing playable files ( P. 18).
The disc was inserted upside down. Insert the disc with the label facing upward.
The front panel display indicates
“no operation”, and a disc cannot
be inserted or unloaded.
The clock/alarm/tone settings are in progress.
Alternatively, the alarm is playing.
Complete the clock/alarm/tone settings. Alternatively, stop
the alarm.
USB device playback
Problem Cause Solution
MP3/WMA file on the USB
device does not play.
The USB device is not recognized. Turn the system off and disconnect the USB device.
Then turn the system on and reconnect the USB device to
the unit.
If the solutions above do not resolve the problem, the USB
device is not playable on the unit ( P. 18).
The USB device does not contain playable files. Use a USB device contains playable files ( P. 18).
When you connect a USB device,
the front panel display indicates
“USB OverCurrent,” and then
the front panel display goes
blank.
An incompatible USB device is connected to the
unit. Alternatively, the USB device is not connect
firmly to the unit.
Turn the system off and disconnect the USB device.
Then turn the system on and reconnect the USB device to
the unit.
If the solutions above do not resolve the problem, the USB
device is not playable on the unit ( P. 18).
FM reception
Problem Cause Solution
Too much noise. The antenna may be connected improperly. Make sure the antenna is connected properly ( P. 3) or
use a commercially available outdoor antenna.
The antenna is too close to the unit or to an
electronic device.
Position the antenna as far away as possible from the unit
or the electronic device.
Too much noise during stereo
broadcast.
The radio station you selected may be far from
your area, or the radio wave reception is weak in
your area.
Try manual tuning to improve the signal quality ( P. 9) or
use a commercially available outdoor antenna.
Even with an outdoor antenna,
radio wave reception is weak.
(Sound is distorted.)
Multipath reflection or other radio interferences
may have occurred.
Change the height, direction, or placement of the antenna.
Remote control
Problem Cause Solution
The remote control does not work
properly.
The remote control may be operated outside its
operation range.
For information on the remote control operation range,
refer to “How to use the remote control” (P. 1).
The remote control signal receiver on the unit
( P. 3) may be exposed to direct sunlight or
lighting (inverted fluorescent lamps).
Change the lighting or orientation of the unit.
The battery may be worn out. Replace the battery with new one ( P. 1).
There are obstacles between the remote control
signal receiver on the unit ( P. 3) and the
remote control.
Remove the obstacles.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha TSX-132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha TSX-132 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 10,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info