Manual Yamaha TSS-1 (page 8 of 72) (English, German, Dutch, French, Italian, Swedish, Spanish)

559139

Zoom out

Zoom in

1/72

E-6

(See figure 1 inside the front cover.)

Caution: Plug in the amplifier unit and other

equipment after all connections are

completed.

: Connect the three satellite speakers with a 3 m cord to

the FRONT L, R and CENTER terminals. Connect the

two satellite speakers with a 7 m cord to the

SURROUND L and R terminals. Connect the

subwoofer to the SUBWOOFER terminal.

: Connect external audio/video units (a personal

computer, a video game player, a portable DVD/CD

player, a video cassette player, etc. which send

playback signals to this system) to these terminals.

Connections

(See figure 2 inside the front cover.)

1 INPUT selector button and indicators

Press this button repeatedly to select an input mode

between DIGITAL, 4CH and 2CH. The current mode is

shown by the lighting of the corresponding indicator.

DIGITAL:

Select this mode to reproduce signals received at the

OPTICAL or the COAXIAL terminal on the rear panel.

When both OPTICAL and COAXIAL terminals receive

signals, the signals at the OPTICAL terminal are

selected.

4CH:

Select this mode to reproduce signals received at the

analog input FRONT and SURROUND terminals on

the rear panel in 4-channel surround sound mode. (The

center speaker is not used in this mode.)

2CH:

Select this mode to reproduce signals received at the

analog input FRONT terminal on the rear panel. (The

PROLOGIC surround mode can be used in this

mode.)

2 MODE selector button and indicators

Press this button repeatedly to select the desired

surround mode between on (DTS,

DIGITAL,

PROLOGIC) and off. The current mode is shown by

the lighting of the corresponding indicator.

* If a DTS or Dolby Digital encoded signal is inputted

when the surround mode is off, the corresponding

indicator lights up dimly.

DTS:

Select this mode to reproduce a DTS encoded input

source.

This mode can be selected only when the input signal

is encoded with DTS and the input mode is set to

DIGITAL.

Controls & connectors

Cautions

● When placing the provided AC adaptor on the desk, etc.,

be sure to fix the adaptor on the desk, etc. to prevent it

from falling. If the adaptor falls, it may cause personal

injury or damage to the adaptor and/or other equipment.

● The SPEAKER OUTPUT terminals on the rear of the

amplifier unit are only designed for connection of the

supplied speakers. Never connect these terminals to an AV

amplifier or a power amplifier, as it may cause

misoperation, fire and/or damage to this system.

DIGITAL:

Select this mode to reproduce a Dolby Digital encoded

input source.

This mode can be selected only when the input signal

is encoded with Dolby Digital and the input mode is set

to DIGITAL.

PROLOGIC:

Select this mode to reproduce a Dolby Prologic

encoded input source.

This mode cannot be selected when the input mode is

set to 4CH.

3 TEST button

Press this button to reproduce a test tone from the

speakers. A test tone is reproduced from each speaker

as shown below. The test tone is used for adjusting

volume balance among all the speakers.

* Not all of the speakers reproduce the test tone

depending on the setting of the SPEAKER MODE

switch (

C).

4 MUTE button and indicator

Press this button to cut off sound output temporarily.

When this function is active, the indicator lights up.

Press this button again to restore sound output.

* Sound output will also be restored by changing the

status of this system between standby and power-on

modes, and changing the input mode or the surround

mode.

5 CENTER level control

This control is used for adjusting the sound level from

the center speaker. Turn this control clockwise to

increase the level, and counterclockwise to decrease

the level.

FRONT L FRONT R

SURROUND L

SURROUND R

CENTER

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha TSS-1 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha TSS-1 Manual

Product: