557179

Yamaha T-D500 Manual

11
Zoom out
Zoom in
Previous page
1/142
Next page
English
9 En
OPERATIONS
DAB TUNING
2 Press B / C to select the desired station
order setting and then press ENTER.
y
While pressing B / C to select the desired setting, “*” is
displayed next to the current setting.
■ Tune Aid
Measure reception strength of the received signal (from 0
(none) to 100 (best)).
1 Select “Tune Aid” in the DAB function menu.
2 Press B / C to select the desired DAB
channel.
The strength of the selected DAB channel signal is
displayed on the front panel display. Adjust the
orientation of the DAB antenna so that the strength of
the selected DAB channel signal gets stronger.
■ Dynamic Range
You can change the dynamic range compression setting.
This is especially useful when you listen to a DAB station
in a noisy environment or at a low volume at night.
1 Select “Dynamic Range” in the DAB function
menu.
2 Press B / C to select the desired dynamic
range compression setting and then press E
or ENTER.
y
While pressing B / C to select the desired setting, “*” is
displayed next to the current setting.
■ DAB Clear
Clears all DAB station information and preset settings
stored in the unit.
y
You can also perform DAB Clear by pressing and holding
CLEAR for more than 3 seconds in the preset tuning mode. See
“Clearing the preset DAB station” on page 8.
Once DAB Clear is performed, the deleted information and preset
settings cannot be restored.
1 Select “DAB Clear” in the DAB function
menu.
2 Press B / C to select “OK” and then press E
or ENTER.
After DAB Clear is complete, the Autoscan Full
function starts automatically (see page 6).
y
To cancel the operation, select “CANCEL”.
■ Auto Power Down
This unit automatically enters standby mode if it is not
operated for specified amount of time.
This setting is effective for all tuning modes.
1 Select “Auto Power Down” in the DAB
function menu.
2 Press B / C to select the desired auto power
down setting and then press E or ENTER.
y
While pressing B / C to select the desired setting, “*” is
displayed next to the current setting.
Choice Description
Alphanumeric
Default setting. Stations are listed in the
alphanumeric order.
Active
This unit lists the currently active DAB
stations first, and then other DAB
stations in the alphanumeric order.
Ensemble
Select this setting to browse through the
registered DAB stations from the lowest
to the highest channel labels (see page
10).
Choice Description
AUTO
Default setting. This unit utilizes the
dynamic range compression
automatically if it is transmitted.
OFF
This unit does not utilize the dynamic
range compression.
Note
Choice Description
OFF
This unit will not be set to standby
mode automatically.
4 Hours,
8 Hours,
12 Hours
This unit is set to standby mode
automatically after the specified
amount of time passes.
Default setting is “8 Hours”.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha T-D500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha T-D500 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 4,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info