587014
59
Zoom out
Zoom in
Previous page
1/83
Next page
UTILITY MIDI
54
LOCAL CONTROL ON/OFF
MD>LOCAL
Local=on
Summary: Determines whether the SY35 keyboard
controls the internal tone generator system or
not.
Settings: on, off.
Procedure: Use the [6] cursor key to move the cur-
sor to the lower display line. Use the [–1/NO]
and [+1/YES] keys to turn local control on or
off.
Details: Normally, local control will be turned
“on” so that the SY35 keyboard plays its own
internal tone generator system. If you want to
control an external MIDI tone generator or
other device from the SY35 keyboard without
playing the internal tone generator, turn local
control “off.” One possibility is to drive the
SY35 tone generator system from an external
sequencer while independently playing a
separate external tone generator from the SY35
keyboard.
MIDI PROGRAM CHANGE
MD>PROG.CHANGE
=off
Summary: Determines how the SY35 will respond
to MIDI program change messages for remote
voice/multi selection.
Settings: off, common, individual
Procedure: Use the [6] cursor key to move the
cursor to the lower display line. The [–1/NO]
and [+1/YES] keys are used to select the desired
MIDI program change mode.
Details: The “off” setting turns MIDI program
change reception and transmission off, so MIDI
program change messages received from exter-
nal equipment will not cause the corresponding
SY35 voice to be selected, and no program
change messages will be transmitted by the
SY35 when one of its voices are selected.
In the “common” mode, program change
numbers 0 through 63 received from external
equipment will select SY35 voices 1.1 through
8.8, and program change numbers 64 through
79 select multi-play setups 1.1 through 2.8. The
card, internal or preset voice banks cannot be
selected via MIDI control. The corresponding
program change number will also be transmitted
by the SY35 when one of its voices are selected.
The “individual” mode allows individual voice
selection for each multi-play part when the
MULTI play mode is active. Program change
between 0 and 63 received in a specific MIDI
channel will change only the voice for the multi-
play part assigned to that channel.
MIDI CONTROL CHANGE
MD>CTRL.CHANGE
=off
Summary: Determines whether or not the SY35 will
receive and transmit MIDI control change mes-
sages.
Settings: off, on
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha SY35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha SY35 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha SY35

Yamaha SY35 User Manual - English - 49 pages

Yamaha SY35 User Manual - German - 84 pages

Yamaha SY35 User Manual - German - 49 pages

Yamaha SY35 Quick start guide - French - 49 pages

Yamaha SY35 User Manual - French - 84 pages

Yamaha SY35 User Manual - Swedish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info