587014
17
Zoom out
Zoom in
Previous page
1/83
Next page
VOICE VECTOR
12
Details: Step 1 is the first step recorded and step 50
is the last. Experience will give you a feel for
relating specific points in a dynamic vector to
the corresponding steps.
l X-axis & Y-axis
VV L.ED A B C D
1 X 0 Y 0 End
Summary: These parameters define the position of
the currently selected step on the X and Y axes
of the level vector control range.
Settings: –31 … 0 … +31
Procedure: After selecting the step to be recorded
as described in the previous function, use the [4]
and [6] cursor keys to place the underline
cursor under the X or Y parameter. Use the
[–1/NO] and [+1/YES] keys to set the value as
required.
Details: On the X (D-C) axis, a setting of –31 places
the step as far as possible toward the D element
while a setting of +31 places it as far as possible
toward the C element. The Y (A-B) axis values
work in the same way: a setting of
–31 places the step as far as possible toward the
B element while a setting of +31 places it as far
as possible toward the A element. In both axes a
setting of 0 places the step at center position.
C
A
B
D
+31
0
–31
+31–31
X axis
Y axis
l Time
VV L.ED A B C D
1 X 0 Y 0 End
Summary: Multiplies the vector rate setting of the
current level vector step only. Also allows vec-
tors to be looped or ended at the current step.
Settings: 1 … 254, Rep, End
Procedure: Use the [4] and [6] cursor keys to place
the underline cursor under the rightmost value
on the lower display line (Time). Use the
[–1/NO] and [+1/YES] keys to select the re-
quired time value, repeat, or end.
Details: Time values multiply the vector rate setting
for the current step. If the vector rate parameter
is set to 30ms, for example, setting the time
parameter to 2 results in a step length of 60ms,
setting it to 3 results in a step length of 90ms,
and so on. Since the maximum time value is
254, extremely long steps can be created.
If you select the “End” setting, the vector will
end at the current step.
The “Rep” setting causes the vector to loop
back to the first step from the current step, re-
peating continuously.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha SY35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha SY35 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha SY35

Yamaha SY35 User Manual - English - 49 pages

Yamaha SY35 User Manual - German - 84 pages

Yamaha SY35 User Manual - German - 49 pages

Yamaha SY35 Quick start guide - French - 49 pages

Yamaha SY35 User Manual - French - 84 pages

Yamaha SY35 User Manual - Swedish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info