587014
12
Zoom out
Zoom in
Previous page
1/83
Next page
VOICE COMMON
7
AFTER TOUCH (Amplitude & Pitch Modulation, Pitch & Level Control)
VC>AFTER TOUCH
AM=on PM=on ->
Summary: Assigns keyboard after-touch to ampli-
tude modulation, pitch modulation, pitch
control, or level control — or any combination
of the above.
Settings: AM (Amplitude Modulation): off, on
PM (Pitch Modulation): off, on
Pit (Pitch Control): –12 … 0 … +12 max.*
Lev (Level Control): off, on
Procedure: Use the [4] and [6] cursor keys to place
the underline cursor under the AM, PM, Pit, or
Lev parameter. The arrows at either end of the
display mean that more parameters can be
accessed by scrolling in the indicated direction.
Use the [–1/NO] and [+1/YES] keys to turn the
AM, PM, and/or Lev parameter on or off, or to
select the desired Pit control range.
Details: As with the modulation wheel, amplitude
modulation produces a tremolo effect while
pitch modulation produced a vibrato effect. The
harder you press a key, the deeper the
modulation. This is only an “off/on” switch,
however, and the maximum depth of
modulation to be applied must be set using the
LFO AM Depth and PM Depth parameters in
the ELEMENT TONE edit mode.
When after touch is assigned to amplitude or
pitch modulation, LFO modulation can only be
applied via after touch.
The Pit parameter allows keyboard after touch
to be used for note bending. The greater the key
pressure the greater the amount of pitch bend.
Positive values produce an upward bend when
key pressure is applied, and minus values pro-
duce a downward bend. Each increment from
represents a semitone. A setting of “0” pro-
duces no pitch bend. A setting of “12” allows a
maximum upward pitch bend of one octave,
while a setting of “–4” allows a maximum
downward pitch bend of a major third.
When the Lev parameter is turned on it becomes
possible to control the level of the sound over a
limited range by keyboard after touch. The
amount and direction (i.e. an increase or de-
crease) of level change depends on the setting of
the AFTER TOUCH SENSITIVITY parameter
in the ELEMENT TONE edit mode.
If both WHEEL and AFTER TOUCH are as-
signed to modulation control, the controller via
which the highest modulation level is applied
will take priority when both are used simul-
taneously.
* This range may be more limited in some cases.
An exclamation mark (!) will appear after the
range value when the limit is reached.
ENVELOPE (Attack & Release Rates)
VC>ENVELOPE
AR= 0 RR= 0
Summary: Sets the overall attack and release rates
for the current voice.
Settings: AR (Attack Rate): –99 … 0 … +99 max.*
RR (Release Rate): –99 … 0 … +99 max.*
Procedure: Use the [4] and [6] cursor keys to place
the underline cursor under the AR or RR
parameter. Use the [–1/NO] and [+1/YES] keys
to set the selected parameter as required.
Details: Although much more detailed envelope
programming capability is available for
individual elements (see the ELEMENT
ENVELOPE edit mode), these functions provide
an easy way to adjust the most important
envelope parameters for the overall voice.
Positive values produce a faster attack or release
time, while negative values produce a slower
attack or release time. You might want to
lengthen the release time of a voice, for
example, to produce a lingering sustain effect
after you release the keys.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha SY35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha SY35 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha SY35

Yamaha SY35 User Manual - English - 49 pages

Yamaha SY35 User Manual - German - 84 pages

Yamaha SY35 User Manual - German - 49 pages

Yamaha SY35 Quick start guide - French - 49 pages

Yamaha SY35 User Manual - French - 84 pages

Yamaha SY35 User Manual - Swedish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info