587008
20
Zoom out
Zoom in
Previous page
1/204
Next page
Using USB storage devices
20
The Controls &
Connectors
Owner’s Manual
Using USB storage devices
When using USB storage devices, make sure to connect them to the USB TO DEVICE connector, and follow the important
precautions below.
Compatible USB devices
Connect only a USB storage device (such as hard disk, CD-
ROM, flash disk and other drives) to the USB TO DEVICE
connector. Other devices such as a computer keyboard or
mouse cannot be used.
Both bus-powered (powered by the host device) or self
powered (battery or external power supply) types can be
used.
The S90 ES does not necessarily support all commercially
available USB storage devices. Yamaha cannot guarantee
operation of USB storage devices that you purchase.
Before purchasing USB storage devices, please consult
your Yamaha dealer, or an authorized Yamaha distributor
(see list at end of the Owner’s Manual) for advice, or see the
following website:
http://www.yamahasynth.com/
n Although CD-R/W drives can be used to load data to the instrument,
they cannot be used for saving data. However, you can transfer
data to a computer and save data to a CD using the CD-R/W drive
on the computer.
Formatting USB storage media
When a USB storage device is connected or media is
inserted, a “USB device unformatted.” message may
appear in the LCD display, indicating that the device or
media must be formatted for use. Execute the Format
operation in the File mode (Page 168).
To protect your data (Write-protect):
To prevent important data from being inadvertently erased,
apply the write-protect provided with each storage device
or media.
If you are saving data to the USB storage device, make sure
to remove the write-protect.
Precautions when using the USB TO DEVICE
connector
Never turn the USB device’s power on/off and never
plug/unplug the USB cable when the connected USB
storage device is the self powered type. Doing so may
result in the operation of the synthesizer “freezing” or
hanging up.
While the instrument is accessing data (such as in the
Save, Load and Delete operations in the File mode),
do NOT unplug the USB cable, do NOT remove the
media from the device, and do NOT turn the power off
to either device. Doing so may corrupt the data on
either or both devices.
USB connector types
There are two different types of USB connectors, and
the rear panel of the instrument features both. Take
care not to confuse the two.
USB TO HOST connector
This type is used to connect the instrument to a
computer, and allows you to transfer MIDI data
between the devices. The USB connection between
the instrument and the computer can only be used for
transfer of MIDI data. Unlike MIDI, USB can handle
multiple ports via a single cable.
USB cables have different connectors on each end:
the A type and the B type. Connect the A type to your
computer and the B type to the USB TO HOST
connector.
USB TO DEVICE connector
This type is used to connect the instrument to a USB
storage device, and allows you to save data you’ve
created to the connected device, as well as load data
from the connected device. This lets you save the data
created on this instrument to the external USB storage
device and load the data from the external USB
storage device to the instrument. Save and Load
operations are executed in the File mode (page 168).
USB cables have different connectors on each end:
the A type and the B type. Connect the A type to the
USB TO DEVICE connector and the B type to the USB
storage device.
n The computer cannot access the USB storage device
connected to the S90 ES’s USB TO DEVICE connector, even
if connecting as shown above. Only from the File mode on
the instrument itself can you access the data on the USB
storage device connected to the USB TO DEVICE connector.
n Though the S90 ES supports the USB 1.1 standard, you can
connect and use a USB 2.0 storage device with the S90 ES.
However, note that the transfer speed complies to USB 1.1.
S90 ES
MIDI data transfer
Connecting to a computer
Connecting to a USB
storage device (hard
disk, CD-ROM, flash
disk and other drives)
Saving/Loading data in
the File mode (page 168)
A type
B type
USB TO DEVICE
connector
USB TO HOST
connector
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha S90ES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha S90ES in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha S90ES

Yamaha S90ES User Manual - German - 204 pages

Yamaha S90ES User Manual - Dutch - 204 pages

Yamaha S90ES User Manual - French - 204 pages

Yamaha S90ES User Manual - Portuguese - 204 pages

Yamaha S90ES User Manual - Spanish - 198 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info