587006
128
Zoom out
Zoom in
Previous page
1/139
Next page
128
Basics Section Quick Guide Reference Appendix
Troubleshooting
Troubleshooting
No sound? Wrong sound? When a problem like this occurs, please check the following points before assuming that
the product is faulty. In many cases you’ll find the solution to your problem here. If the problem persists, then contact
your Yamaha dealer or service center (Page 138).
No sound.
Is the power of the S90 and any external equipment connected to the S90 turned on? (Page 14)
Have you made all the appropriate level settings – including the Master Volume on the S90 and the volume settings on
any connected external equipment? (Page 14)
Is the Foot Controller pressed down (when it is connected to the FOOT CONTROLLER jack)? (Page 18)
Is the S90 properly connected to related external equipment (e.g., amplifier or speaker) via audio cables? (Page 15)
When the voice produces no sound, is the Volume or Level in the Voice common edit set appropriately?
(Ref. #43, #135)
When the voice produces little or no sound, have you changed any of the CS slider settings? (The CS 1-4 sliders can
control the element levels in the voice. If all these are set to “0,” the voice will not sound.) (Page 53)
When the voice produces no sound, are the parameters in the Voice element edit (e.g., element switch, note limit,
velocity limit) set appropriately in the Voice common edit? (Page 62)
When the voice produces no sound, are the effect and filter settings appropriate? (Inappropriate filter cutoff frequency
settings can result in no sound.) (Pages 63, 67)
When the performance produces no sound, has a voice been assigned to each part? (Ref. #29, #36)
When the performance produces no sound, is the note limit of each part set appropriately? (Ref. #32)
When the performance produces no sound, is the volume of each part set appropriately? (Ref. #43, #135)
When the performance produces little or no sound, have you changed any of the CS slider settings? (The CS 1-4 sliders
can control the part levels in the performance. If all these are set to “0,” the performance will not sound.) (Page 53)
When the performance produces no sound, is the output select of each part set appropriately? (Ref. #115)
When the song playback produces no sound, are any or all of the tracks muted? (Page 76)
When the song playback produces no sound, are the output channel of each track in the play mode and the receive
channel of each part in the Mixing mode set appropriately? (Page 77)
When the song playback produces no sound, is the volume of each part in the Mixing mode set appropriately?
(Page 78)
When the song playback produces no sound, is the output select of each part in the Mixing mode set appropriately?
(Page 77)
When the arpeggio produces no sound, are the note limit and velocity limit set appropriately? (Ref. #81, #82)
Is MIDI Local set to off in the Utility mode? (Ref. #183)
Distorted sound.
Are the effect settings appropriate? (Ref. #190-#205)
Are the filter settings appropriate? (Excessively high filter resonance settings can cause distortion.) (Ref. #91-#93)
Is the MASTER VOLUME set so high that clipping is occurring? (Page 14)
Is the volume of each element in the Voice mode or the volume of each part in the Performance mode or the volume of
each track/part in the Song mode set too high? (Ref. #43, #135)
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha S90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha S90 in the language / languages: English as an attachment in your email.

The manual is 3,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha S90

Yamaha S90 Installation Guide - English - 34 pages

Yamaha S90 User Manual - German - 34 pages

Yamaha S90 User Manual - German - 139 pages

Yamaha S90 User Manual - Dutch - 137 pages

Yamaha S90 User Manual - French - 139 pages

Yamaha S90 User Manual - French - 34 pages

Yamaha S90 User Manual - Italian - 138 pages

Yamaha S90 User Manual - Italian - 36 pages

Yamaha S90 User Manual - Polish - 140 pages

Yamaha S90 User Manual - Portuguese - 141 pages

Yamaha S90 User Manual - Spanish - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info