587006
123
Zoom out
Zoom in
Previous page
1/139
Next page
123
Basics SectionQuick GuideReferenceAppendix
Installing Optional Hardware
Installing Optional Hardware
Optional units that can
be installed to the S90
Installation locations
Up to three boards can be installed to the rear panel.
Installation Precautions
Before installing the optional hardware, make sure you
have a Philips screwdriver.
• Before beginning installation, switch off the power to
the S90 and connected peripherals, and unplug them
from the power outlet. Then remove all cables
connecting the S90 to other devices. (Leaving the
power cord connected while working can result in
electric shock. Leaving other cables connected can
interfere with work.)
• Be careful not to drop any screws inside the instrument
during installation (this can be prevented by keeping
the optional units and cover away from the instrument
while attaching). If this does happen, be sure to
remove the screw(s) from inside the unit before
turning the power on. Loose screws inside the
instrument can cause improper operation or serious
damage. If you are unable to retrieve a dropped screw,
consult your Yamaha dealer for advice.
• Install the optional units carefully as described in the
procedure below. Improper installation can cause
shorts which may result in irreparable damage and
pose a fire hazard.
• Do not disassemble, modify, or apply excessive force to
board areas and connectors on optional units. Bending
or tampering with boards and connectors may lead to
electric shock, fire, or equipment failures.
• Before handling the optional units, you should briefly
touch the metal surface to which the optional unit
cover is attached (or other such metallic area — be
careful of any sharp edges) with your bare hand so as
to drain off any static charge from your body. Note that
even a slight amount of electrostatic discharge may
cause damage to these components.
• It is recommended that you wear gloves to protect your
hands from metallic projections on optional units and
other components. Touching leads or connectors with
bare hands may cause finger cuts, and may also result
in poor electrical contact or electrostatic damage.
• Handle the optional units with care. Dropping or
subjecting them to any kind of shock may cause
damage or result in a malfunction.
• Be careful of static electricity. Static electricity
discharge can damage the IC chips on the Plug-in
board. Before you handle the optional Plug-in board, to
reduce the possibility of static electricity, touch the
metal parts other than the painted area or a ground
wire on the devices that are grounded.
• Do not touch the exposed metal parts in the circuit
board. Touching these parts may result in a faulty
contact.
• When moving a cable, be careful not to let it catch on
the circuit Plug-in board. Forcing the cable in anyway
may cut the cable, cause damage, or result in a
malfunction.
• Be careful not to misplace any of the screws since all of
them are used.
• Do not use any screws other than what are installed on
the instrument.
mLAN8EPlug-in Boards
mLAN8E cover
Plug-in Board
cover
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha S90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha S90 in the language / languages: English as an attachment in your email.

The manual is 3,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha S90

Yamaha S90 Installation Guide - English - 34 pages

Yamaha S90 User Manual - German - 34 pages

Yamaha S90 User Manual - German - 139 pages

Yamaha S90 User Manual - Dutch - 137 pages

Yamaha S90 User Manual - French - 139 pages

Yamaha S90 User Manual - French - 34 pages

Yamaha S90 User Manual - Italian - 138 pages

Yamaha S90 User Manual - Italian - 36 pages

Yamaha S90 User Manual - Polish - 140 pages

Yamaha S90 User Manual - Portuguese - 141 pages

Yamaha S90 User Manual - Spanish - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info