588954
104
Zoom out
Zoom in
Previous page
1/112
Next page
104
Appendix
Cannot receive bulk data.
Has the Device Number parameter been set correctly? When receiving data with the S03’s Bulk Dump function, you
must set the S03 to the same device number as that specified on the transmitting device. (Page 93)
Has the HOST SELECT switch (page 10) been set appropriately? (Pages 12 to 14)
Cannot properly receive or respond to data from the connected
device.
Has the HOST SELECT switch (page 10) been set appropriately? (Pages 12 to 14)
Is either the Demo mode (page 16) or the Compare function (pages 55 and 70) active? When either of these are active,
incoming MIDI data is ignored.
Is the MIDI cable intact and connected properly?
Checking the MIDI Cable
Here’s a quick way to check a MIDI cable, to make sure it’s properly conducting signals.
nBefore starting this, set the S03 to Voice mode and make sure that the S03 is properly outputting sound when you play the
keyboard.
1Disable keyboard control over the tone generator by setting Local Sw (PAGE 2 in the MIDI mode) to “off.” In this
condition, playing the keyboard does not produce any sound. (Page 93)
2Directly connect the MIDI cable in question — one end to the MIDI IN terminal of the S03, the other to the MIDI
OUT. This sets up an external MIDI “loop,” routing the keyboard of the S03 to its tone generator, by way of the
MIDI cable (and not by Local Switch).
3Set the HOST SELECT switch on the rear panel to “MIDI.” (Page 10)
4Set the Receive Channel parameter (PAGE 3 in the MIDI mode) to “omni” (all channels). This allows the Voice to
respond to the incoming MIDI data, regardless of the MIDI Transmit Channel setting for the keyboard.
5Play the keyboard. If you’ve made all the above settings correctly and you hear the Voice, the MIDI cable is intact.
nKeep in mind that the cable or connections could still be faulty, even if you hear sound — especially if the sound is
intermittent or cuts in and out.
nAfter conducting this check, make sure to reset the Local Sw (PAGE 2 in the MIDI mode) to “on,” if necessary. If you leave
this set to “off,” the S03 keyboard will not control its own sounds.
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha S03SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha S03SL in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha S03SL

Yamaha S03SL User Manual - German - 111 pages

Yamaha S03SL User Manual - French - 111 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info