588953
26
Zoom out
Zoom in
Previous page
1/26
Next page
26
Troubleshooting
If you encounter problems such as no sound output or abnormal behavior, verify the connections
before checking the following. If you are using Voice Editor for Windows, refer to the XGworks(lite)
owner’s manual too.
<Macintosh>
The printer port is not recognized.
The printer port will not be recognized if
AppleTalk is ON. Note that with some Macintosh
models, AppleTalk is automatically enabled when
starting up.
Verify that the “Printer” checkbox has been
checked in the OMS MIDI Setup window.
The modem port is not recognized.
On some Macintosh models such as the
Performa series, the modem port cannot be used
and only the printer port is available.
Verify that the “Modem” checkbox has been
checked in the OMS MIDI Setup window.
No MIDI In/Out data
Is the MIDI device’s HOST SELECT switch set
correctly?
Make the correct setting according to the
instructions in the S03 Owner’s Manual.
In the OMS Port Setup, is MIDI In/Out set to
“unknown”? If you change the OMS ports or
setup, the OMS output ports have to be set
accordingly in Voice Editor’s OMS Port Setup
window. Choose the appropriate receiving
device.
Is OMS using the same port as that connected to
the cable? Open the OMS MIDI Setup window
and verify that the checkbox for the relevant port
has been checked.
If the port and setup assignments are frequently
altered, OMS may be unable to easily recognize
the serial port. Reboot the Macintosh, set up
OMS correctly, then start up Voice Editor.
Bulk data are not received.
Open the OMS Port Setup window and check
that the MIDI In has been properly assigned
(Page 24).
Open the Editor Setup Dialog and check that the
Device No. has been properly assigned (Page 10).
Voice Editor does not start up when Library File
(extension .S3V) is double-clicked.
Change the Type/Creator settings for Library
Files as follows, then try double-clicking the file
again.
Type: S3V_
Creator: YS03
<Windows>
Voice Editor is not available in the Plug-in menu.
Is the Voice Editor installed in the same folder as
XGworks(lite)? If not, reinstall Voice Editor.
Bulk data is not received.
Is the MIDI In set correctly in the System Setup
of XGworks?
Open the Editor Setup Dialog and check that the
Device No. has been properly assigned (Page 10).
MIDI Out port is not available in Editor Setup.
The MIDI Out port in Editor Setup can be chosen
from the MIDI Out ports in the System Setup of
XGworks(lite). Check the MIDI Out settings in the
System Setup of XGworks(lite).
<Windows / Macintosh>
Sound does not change when using knobs or
sliders.
Are the MIDI Out port and Device Number set
correctly in the Editor Setup? (Page 10)
Bulk data is not transmitted.
Are the MIDI Out port and Device Number set
correctly in the Editor Setup? (Page 10)
Is the Dump Interval in the Editor Setup too
short? Make sure the Dump Interval is at least 10
ms.
Sound is doubled when playing keyboard.
On your S03 synthesizer, switch Local to OFF.
No sound heard when clicking on-screen
keyboard in Edit Window.
Is the MIDI Ch. set correctly in the Editor Setup?
(Page 10)
Sound does not change when Monitor button is
pressed.
Are the MIDI Out port and Device No. set
correctly in the Editor Setup (OMS Port Setup)?
(Pages 10 and 24)
VoiceEditor.fm Page 26 Tuesday, January 30, 2001 10:31 AM
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha S03 BL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha S03 BL in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha S03 BL

Yamaha S03 BL User Manual - English - 112 pages

Yamaha S03 BL User Manual - German - 111 pages

Yamaha S03 BL User Manual - German - 26 pages

Yamaha S03 BL User Manual - Dutch - 110 pages

Yamaha S03 BL User Manual - French - 111 pages

Yamaha S03 BL User Manual - French - 26 pages

Yamaha S03 BL User Manual - Italian - 110 pages

Yamaha S03 BL User Manual - Portuguese - 103 pages

Yamaha S03 BL User Manual - Spanish - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info