Manual Yamaha RX-V992 (page 34 of 87) (English)

549984

Zoom out

Zoom in

1/87

CONNECTING SPEAKER SYSTEMS

Connect the SPEAKERS terminals to your speakers with wire

of the proper gauge, cut as short as possible. If the connections

are faulty, no sound will be heard from the speakers. Make sure

that the polarity of the speaker wires is correct, that is, + and –

markings are observed. If these wires are reversed, the sound will

be unnatural and will lack bass. Do not let the bare speaker wires

touch each other or any other metal part as this could damage this

unit and/or speakers.

NOTE: Use speakers with the specified impedance shown on the

rear of this unit.

Red: positive (+)

Black: negative (–)

➀ Unscrew the knob.

➁ Insert the bare wire.

[Remove approx. 5mm (1/4”)

insulation from the speaker

wires.]

➂ Tighten the knob and

secure the wire.

NOTE: Banana Plug connections are also possible (except

Singapore model). Simply insert the Banana Plug connector into

the corresponding terminal.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V992 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha RX-V992 Manual

Product: