40
BASIC OPERATION
1 Tune to a station.
(Refer to the previous page for the tuning procedure.)
2 Select a group (A – E) of preset stations.
3
4 Select a preset station number (1 to 8) where you want
to program the station before the “MEMORY” indicator
goes off from the display.
* In the same way, program other stations to A2, A3 ... A8.
* You can program more stations to the preset station
numbers on other groups in the same way by selecting
other groups in step 2.
11 Select the group of preset stations.
22 Select the preset station number.
Notes
• A new setting can be programmed in place of the former
one.
• For presets, the setting of the reception mode (stereo or
monaural) is stored along with the station frequency.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if this unit is set to the standby mode or
the power plug is disconnected from the AC outlet or the
power is cut due to a temporary power failure. If, however, the
power is cut for more than one week, the memory may be
deleted. If so, it can be re-programmed by simply following
the Preset tuning steps.
Ⅵ Manual preset tuning
This unit can store station frequencies selected by the tuning operation. With this function, you can recall any desired station only by
selecting the preset station number. Up to 40 stations (8 stations x 5 groups) can be stored.
To store stations
2, 11 3
