37
English
1 Select the source you want to record.
2 Play the source and then turn the VOLUME control up
to confirm the input source. (Refer to page 39 for
details on tuning.)
3 Begin recording to the tape deck (or MD recorder etc.)
or VCR connected to this unit.
4 If the tape deck (or MD recorder etc.) is used for
recording, you can monitor the sound of recording.
To monitor the sound of recording, light up the
“TAPE/MD MONITOR” indicator on the display by
pressing the TAPE/MD MON/EXT. DECODER button
or TAPE/MD key.
Notes on recording
●
The VOLUME, BASS, TREBLE, BALANCE controls, the
BASS EXTENSION button and the settings of DSP have
no effect on the material being recorded.
●
Turn off the “TAPE/MD MONITOR” indicator when the
recording is finished by pressing the TAPE/MD MON/EXT.
DECODER button once or more. Also, do not make “EXT.
DECODER” appear on the display.
●
Composite video and S video signals pass independently
through this unit’s video circuits. Therefore, when recording or
dubbing video signals, if your video source unit is connected
to provide only a S video (or only a composite video) signal,
you can record only a S video (or only a composite video)
signal on your VCR.
●
A source that is connected to this unit between optical or
coaxial digital terminals only cannot be recorded by a tape
deck or VCR connected to this unit.
●
A source of signals input to the EXTERNAL DECODER
INPUT terminals of this unit cannot be recorded.
●
Please check the copyright laws in your country to record
from records, compact discs, radio, etc. Recording of
copyright material may infringe on copyright laws.
If you play back a video source that uses scramble or
encoded signals to prevent it from being dubbed, there may
be a case that display information superimposed on the
picture and/or the picture itself is disturbed due to those
signals.
Front panel
or
Remote control
