464163
31
Zoom out
Zoom in
Previous page
1/109
Next page
29 En
Optimizing the speaker setting for your listening room
PREPARATION
English
4 Press
D
l / h to select the desired setting
for “EXTRA SP ASSIGN” and then press
D
n.
Extra speaker assignment
EXTRA SP ASSIGN
Selects the function of the speakers connected to the
EXTRA SP terminals.
Choices: FRONT B, ZONE2, PRESENCE, NONE
When you use the alternative front speaker
system (see page 38)
Select “FRONT B”.
When you use the Zone 2 speakers (see
page 96)
Select “ZONE2” to set the function of the speakers
to the Zone 2 speakers. This unit drives the Zone 2
speakers by using the internal amplifier.
When you use the presence speakers (see
page 12)
Select “PRESENCE” to set the function of the
speakers to the presence speakers.
When you do not use the EXTRA SP
terminals
Select “NONE” to deactivate the EXTRA SP
terminals.
If you select “ON” in “BI-AMP” (see page 101), you cannot
select “PRESENCE” or “ZONE2” in “EXTRA SP
ASSIGN”.
5 Press
D
l / h to select “SETUP”.
Choices: AUTO, RELOAD, UNDO, DEFAULT
Select “AUTO” to automatically run the entire
“AUTO SETUP” procedure.
Select “RELOAD” to reload the last “AUTO
SETUP” settings and override the previous
settings.
Select “UNDO” to undo the last “AUTO SETUP”
settings and restore the previous settings.
Select “DEFAULT” to reset the “AUTO SETUP”
parameters to the initial factory settings.
RELOAD” or “UNDO” is available only when you have
previously run “AUTO SETUP” and confirmed the results.
RELOAD” or “UNDO” is not available when you change
the setting of “BI-AMP” in the advanced setup (see
page 101) or “EXTRA SP ASSIGN” in “SOUND MENU”
(see page 70).
6 Press
D
l / h to select the desired setting of
“EQ” and then press
D
n.
Parametric equalizer type EQ
Parametric equalizer adjusts the level of the specified
frequency bands. This unit automatically selects the
crucial frequency bands for the listening room and
adjusts the level of the selected frequency bands to
create a cohesive sound field in the room. You can
select the type of the parametric equalizer adjustment
from the following choices.
Choices: NATURAL, FLAT, FRONT
Select “NATURAL” to average out the frequency
response of all speakers with higher frequencies
being less emphasized. Recommended if the FLAT
setting sounds a little harsh.
Select “FLAT” to average the frequency response
of all speakers. Recommended if all of your
speakers are of similar quality.
Select “FRONT” to adjust the frequency response
of each speaker in accordance with the sound of
your front speakers. Recommended if your front
speakers are of much higher quality than your other
speakers.
7 Press
D
n to select “START” and then press
D
ENTER to start the setup procedure.
This unit starts the auto setup procedure. Loud test
tones are output from each speaker during the auto
setup procedure. Once all items are set, the
“AUTO:RESULT” display appears in the OSD.
During the auto setup procedure, do not perform any
operation on this unit.
We recommend getting out of the room while this unit is in
the auto setup procedure. It takes approximately 3 minutes
for this unit to complete the auto setup procedure.
Note
Notes
Notes
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V661 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V661 in the language / languages: English as an attachment in your email.

The manual is 7,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V661

Yamaha RX-V661 User Manual - German - 130 pages

Yamaha RX-V661 User Manual - Dutch - 130 pages

Yamaha RX-V661 User Manual - French - 130 pages

Yamaha RX-V661 User Manual - Swedish - 129 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info