464163
27
Zoom out
Zoom in
Previous page
1/109
Next page
25 En
Connections
PREPARATION
English
1 Make sure this unit is turned off.
Refer to the right column for details.
2 Press and hold
C
TONE CONTROL on the
front panel and then press
B
MASTER ON/
OFF inward to the ON position to turn on this
unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
3 Rotate the
D
PROGRAM selector on the
front panel to select “SP IMP.”.
“SP IMP.” and the current speaker impedance setting
(“8 MIN”) appear in the front panel display.
4 Press
C
TONE CONTROL on the front
panel repeatedly to select “6MIN”.
5 Press
B
MASTER ON/OFF on the front
panel to release it outward to the OFF
position to save the new setting and turn off
this unit.
The setting you made is reflected next time you turn on this
unit.
Turning on this unit
Press
B
MASTER ON/OFF
on the front panel
inward to the ON position to turn on this
unit.
When you turn on this unit by pressing
B
MASTER ON/
OFF, the main zone is turned on.
y
When you turn on this unit, there will be a 4 to 5-second delay
before this unit can reproduce sound.
Turning off this unit
Press
B
MASTER ON/OFF
on the front panel
again to release it outward to the OFF
position to turn off this unit.
A
MAIN ZONE ON/OFF on the front panel as well as
I
POWER and
H
STANDBY on the remote control are
operational only when
B
MASTER ON/OFF is pressed
inward to the ON position.
As usual, we recommend using the standby mode to turn off this
unit.
Set the main zone to the standby mode
Press
A
MAIN ZONE ON/OFF
(or
H
STANDBY) to set the main zone to the
standby mode.
In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control.
Turning on the main zone from the
standby mode
Press
A
MAIN ZONE ON/OFF
(or
I
POWER
)
to turn on the main zone.
y
You can also turn on the main zone by pressing
F
SCENE (or
A
SCENE) buttons.
When you turn on this unit, there will be a 4 to 5-second delay
before this unit can reproduce sound.
These buttons are operational only when
B
MASTER ON/
OFF is pressed inward to the ON position.
Setting the speaker impedance
Caution
If you are to use 6 ohm speakers, set “SP IMP.” to
“6MIN” as follows BEFORE using this unit. 4 ohm
speakers can be also used as the front speakers.
Note
TONE CONTROL
MASTER
ON
OFF
While holding
down
Turning this unit on and off
Notes
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V661 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V661 in the language / languages: English as an attachment in your email.

The manual is 7,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V661

Yamaha RX-V661 User Manual - German - 130 pages

Yamaha RX-V661 User Manual - Dutch - 130 pages

Yamaha RX-V661 User Manual - French - 130 pages

Yamaha RX-V661 User Manual - Swedish - 129 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info