Manual Yamaha RX-V595aRDS (page 50 of 60) (English)

549977

Zoom out

Zoom in

1/60

SETUP CODES

If you are using the DVD MENU position

for a second (or third) VCR, you must

preset the code for an LD player to the

DVD/LD position.

1. Turn on the VCR to be used.

2. Set the SELECTOR DIAL to the

CBL/DBS or DVD MENU position.

3. Press both VOLUME buttons (

) for about four seconds at the

same time so that the indicator

flashes twice.

4. Press MUTE.

5. Use the numeric buttons to enter the

four-digit code for the second (or

third) VCR. Make sure that the

indicator flashes twice. If the

indicator does not flash, repeat

steps 3 and 4, and re-enter the

code.

6. Press POWER (or any other button)

on the remote control to check if you

have preset the code correctly. If

the VCR cannot be controlled with

the remote control, try entering

another code for the same manufac-

turer.

To control your components

(MD recorder, DVD player,

TV, etc.)

1. Turn on the component to be used.

2. Set the SELECTOR DIAL to the

desired position for the component

(TAPE/MD, DVD/LD, TV, etc.).

3. Press both VOLUME buttons (

) for about four seconds at the

same time so that the indicator

flashes twice.

4. Use the numeric buttons to enter the

four-digit manufacturer’s code for

the component to be used. Make

sure that the indicator flashes twice.

If the indicator does not flash, repeat

step 3 and re-enter the code.

5. Press POWER (or any other button)

on the remote control to check if you

have preset the code correctly. If

the component cannot be controlled

with the remote control, try entering

another code for the same manufac-

turer.

To use a second (and third) VCR

You can use the CBL/DBS and/or DVD

MENU positions to control a second

(and/or third) VCR if a CBL (or DBS) or

DVD player is not being used.

Returning to the factory-set

codes

To return all components to the factory-

set codes, follow these steps.

1. Set the SELECTOR DIAL to a

position other than the AMP/TUN or

DSP position.

2. Press both VOLUME buttons (

) for about four seconds at the

same time so that the indicator

flashes twice.

3. Enter code number “9987”.

4. Make sure that the indicator flashes

twice.

To return each component to the factory-

set code, follow these steps.

1. Set the SELECTOR DIAL to the

position for the component to be

returned to the factory-set code.

2. Press both VOLUME buttons (

) for about four seconds at the

same time so that the indicator

flashes twice.

3. Enter code number “9999”.

4. Make sure that the indicator flashes

twice.

The following codes are preset as the

factory settings.

Factory-set codes

POSITION Component Code

TV TV 0037

CBL/DBS DBS tuner 2455

VCR VCR 3072

DVD/LD DVD player

4545 YAMAHA

CD CD player

6187 YAMAHA

TAPE/MD Tape deck

8524 YAMAHA

We recommend that you write all the

code numbers you have preset on the

“Quick Reference Card.”

Presetting the remote control

Perform the presetting procedure for each component you want to control with the remote control.

Note: If your component does not respond to any of the codes listed for the manufacturer, use the original remote control that was

supplied with the component.

01RX-V595aRDS-6 6/24/99, 11:02 AM50

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V595aRDS in the language / languages: English as an attachment in your email.

The manual is 3,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha RX-V595aRDS Manual

Product: