549977
33
Zoom out
Zoom in
Previous page
1/60
Next page
33
English
CHANGING THE RDS MODE
When an RDS station is being received, PS, PTY, RT and/or CT that correspond to the RDS data services employed by the station
light up on the display. By pressing RDS MODE, you can change the display mode among the RDS modes employed by the
received station in the order shown below. Illumination of the RDS modes indicator shows that the corresponding RDS mode has
been selected.
* When an RDS station is being received, do not press RDS MODE until one or more names of RDS modes light up on the display.
If the button is pressed before one or more names light up on the display, the mode cannot be changed. This is because the unit
has not yet received all of the RDS data on the station.
* If no RDS mode lights up on the display, the mode cannot be changed.
* An RDS mode not employed by the station cannot be selected.
Front panel
Notes
The RDS data service cannot be utilized by this unit if the received signal is not strong enough. In particular, the RT mode
requires a large amount of data to be received, so it is possible that the RT mode cannot be displayed even if other RDS modes
(PS, PTY, etc.) are displayed.
There may be a case that RDS data reception is not possible due to poor reception conditions. If so, press TUNING MODE so
that the “AUTO TUNING” indicator goes off from the display. Although the reception mode is changed to monaural by this
operation, when you change the display to RDS mode, RDS data may be displayed.
If the signal strength is weakened by external interference during the reception of an RDS station, the RDS data service may be
cut off suddenly and “
...
WAIT” will appear on the display.
PS PTY RT CT
mode mode mode mode
PS (Program Service name) mode:
The name of the RDS station being received is displayed.
PTY (Program Type) mode:
The type of program on the RDS station being received is
displayed. There are 15 program types to classify RDS
stations. You can make this unit search for a station which is
broadcasting a program of the desired type. See page 34 for
details.
RT (Radio Text) mode:
Information about the program (such as the title of a song,
name of the singer, etc.) on the RDS station being received is
displayed by a maximum of 64 alphanumeric characters,
including the umlaut sign. If other characters are used for RT
data, they are displayed with under-bars.
CT (Clock Time) mode:
The current time is displayed and updated every minute.
If the data is accidentally cut off, “CT WAIT” may appear.
EON (Enhanced Other Networks):
See page 35.
RECEIVING RDS STATIONS
Radio Data System (RDS) is a data transmission system gradually being introduced by FM stations in many countries. Stations
using this system transmit an inaudible stream of data in addition to the normal radio signal.
RDS data contains various information such as PI (Program Identification), PS (Program Service name), PTY (Program Type), RT
(Radio Text), CT (Clock Time), EON (Enhanced Other Networks), etc.
The RDS function is used by network stations.
DESCRIPTION OF RDS DATA
This unit can receive PI, PS, PTY, RT, CT, and EON data when receiving RDS broadcast stations.
01RX-V595aRDS-3 6/24/99, 11:00 AM33
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V595aRDS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V595aRDS in the language / languages: English as an attachment in your email.

The manual is 3,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info