458065

Yamaha RX-V595a Manual

41
Zoom out
Zoom in
Previous page
1/63
Next page
41
English
However, at the normal level suitable for listening in your room,
the low-level parts of source sound often cannot be heard well
because they will be lost among noise in your environment.
Dolby Digital technology has also made it possible to reduce an
original sound track’s dynamic range for a home audio format
by “compressing” the sound data.
MAX: In this position, a source encoded with Dolby Digital
is reproduced in the original sound track’s wide
dynamic range to provide you with powerful sounds
just like those in a movie theater.
Selecting this position will be even better if you can
listen to a source at a high output level in a room
specially soundproofed for audio/video enjoyment.
STD (Standard):
In this position, a source encoded with Dolby Digital
is reproduced in the “compressed” dynamic range of
the source that is suitable for low-level listening.
MIN: In this position, the dynamic range is more reduced
than in the STD position.
Selecting this position will be effective when you
must listen to a sound source at a low level.
* In this position, it may happen that sound is output
faintly or not output normally depending on the
source. In that case, select the MAX or STD
position.
DTS LFE (Adjusting the level of the LFE
channel for DTS)
Control range: –10 dB to +10 dB (in 1 dB steps)
Preset value: 0 dB
* This adjustment is effective only when DTS is being decoded
and the signals of the selected source encoded with DTS
contain LFE signals.
This adjusts the output level of the LFE channel. If the LFE
signals are mixed with signals of other channels and they are
output from the same speakers, the ratio of the LFE signal level
to the level of the other signals can be adjusted.
(See page 8 for details about the LFE channel.)
ADJUSTMENTS IN THE “SET MENU” MODE
The following ten types of functions will maximize the performance of your system and expand your enjoyment for audio listening
and video watching.
1. CNTR (CENTER SPEAKER)
2. REAR (REAR SPEAKERS)
3. MAIN (MAIN SPEAKERS)
4. BASS (LFE/BASS OUT)
5. M.LVL (MAIN LEVEL)
6. D.D.LFE
(DOLBY DIGITAL LFE LEVEL)
For details on “CNTR”, “REAR”, “MAIN”, “BASS” and “M.LVL”,
see page 21. (Once you have selected the appropriate
settings, you do not have to change any settings unless an
alteration is made in your speaker system.)
D.D.LFE (Adjusting the level of the LFE
channel for Dolby Digital)
Control range: –20 dB to 0 dB (in 1 dB steps)
Preset value: 0 dB
* This adjustment is effective only when Dolby Digital is being
decoded and the signals of the selected source encoded with
Dolby Digital contain LFE signals.
This adjusts the output level of the LFE channel. If the LFE
signals are mixed with signals of other channels and they are
output from the same speakers, the ratio of the LFE signal level
to the level of the other signals can be adjusted.
(See page 8 for details about the LFE channel.)
D.RNG (Adjusting the dynamic range)
Choices: MAX/STD/MIN
Preset position: MAX
* This adjustment is effective only when Dolby Digital is being
decoded.
“Dynamic range” is the difference between the maximum level
and the minimum level of sounds.
Sounds on a movie originally designed for movie theaters
feature a very wide dynamic range.
Dolby Digital technology can modify the original sound track
into a home audio format with this wide dynamic range un-
changed.
Powerful sounds of extremely wide dynamic range are not
always suitable for home use. Depending upon the condition of
your listening environment, it may not be possible to increase
the sound output to a level as high as that in a movie theater.
7. D.RNG (DYNAMIC RANGE)
8. DTS LFE (DTS LFE LEVEL)
9. C.DELAY (CENTER DELAY)
10. GUARD (MEMORY GUARD)
11. INPUT (INPUT MODE)
01RX-V595a-e/f5 6/24/99, 11:45 AM41
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V595a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V595a in the language / languages: English, French as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info