464174
68
Zoom out
Zoom in
Previous page
1/84
Next page
En 68
SETUP
This unit supports the HDMI Control function, which allows you to
operate external components via HDMI. If you connect devices
that support HDMI Control (ex. Panasonic VIERA Link-
compatible TVs, DVD/Blu-ray Disc recorders, etc.) J1, you can
use the following operations with the remote control of any of
those devices:
Power synchronization (on/standby)
Volume control, including Mute
Changing the volume of the audio output signal device (either the
TV or this unit)
1
Connect the TV, DVD recorder supporting HDMI
Control to this unit’s HDMI output jack.
2
Turn on the TV and this unit.
Refer to the TV’s instruction manual on how to operate external
components.
3
Set the TV and this unit’s HDMI Control function to
“On.
4
Turn the TV off.
Other synchronized HDMI Control devices are turned off with the
TV. If they are not synchronized, turn them off manually.
5
Turn the TV on.
Confirm that this unit has turned on in conjunction with the TV. If
it is still off, turn it on manually.
6
Change the TV’s input setting to the input jack that
is connected to this unit (ex. HDMI1).
7
If DVD recorder that supports the HDMI Control
function are connected to this unit, turn them on.
8
Confirm that this unit is properly synchronized with
the TV through the following operations by using the
TV remote control.
Power On/Off
Volume Control
Switching between audio output devices
Using the HDMI Control function
NOTE
The following is an example of how to connect this unit, a TV,
and a DVD recorder. Follow the instructions in your TV and
DVD recorder manuals, as well as the ones written below.
Set the TV’s HDMI Control function to “On”
Follow the AV amplifier connection instructions, and connect
this unit to the TV
HDMI
Control signal
(such as volume control)
Remote control of TV
This unit
TV
HDMI connection
Receiver unit Confirm that “Control” in the Setup menu (HDMI
Setup) is set to “On” (p. 56). J2
TV/DVD Recorder Check the instruction manuals for those devices.
Receiver unit Confirm that the input source for the DVD recorder
has been selected. If a different input source has been
selected, please change it manually.
TV/DVD Recorder Confirm that the video signal from the recorder is
being properly received by the TV.
Operations 1-7 will not be required more than twice.
If this unit is not synchronized to the TV’s power operations,
check that the HDMI Control function is set to “On” for both
devices.
If they will not properly synchronize, unplugging and re-
plugging the devices and turning them on and off may solve the
problem.
J
1 : We recommend that you use TVs and DVD/BD recorders from the same
manufacturer whenever possible.
J
2 : The default setting for the HDMI Control function is “Off.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V567 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V567 in the language / languages: English as an attachment in your email.

The manual is 7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V567

Yamaha RX-V567 Quick start guide - English - 8 pages

Yamaha RX-V567 Quick start guide - German - 8 pages

Yamaha RX-V567 User Manual - German - 92 pages

Yamaha RX-V567 Quick start guide - Dutch - 8 pages

Yamaha RX-V567 User Manual - Dutch - 92 pages

Yamaha RX-V567 User Manual - French - 92 pages

Yamaha RX-V567 Quick start guide - French - 8 pages

Yamaha RX-V567 User Manual - Italian - 92 pages

Yamaha RX-V567 Quick start guide - Italian - 8 pages

Yamaha RX-V567 Quick start guide - Swedish - 8 pages

Yamaha RX-V567 User Manual - Swedish - 92 pages

Yamaha RX-V567 User Manual - Spanish - 92 pages

Yamaha RX-V567 Quick start guide - Spanish - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info