Manual Yamaha RX-V496RDS (page 32 of 50) (English)

559117

Zoom out

Zoom in

1/50

RECEIVING RDS STATIONS

Radio Data System (RDS) is a data transmission system by

FM stations in many countries. Stations using this system

transmit an inaudible stream of data in addition to the

normal radio signal.

RDS data contains various information such as PI (Program

Identification), PS (Program Service name), PTY (Program

Type), RT (Radio Text), CT (Clock Time), EON (Enhanced

Other Networks), etc. The RDS function is carried out

among the network stations.

Description of RDS Data

This unit can receive PI, PS, PTY, RT, CT, and EON data

when receiving RDS broadcasting stations.

■ PS (Program Service name) mode:

The name of the RDS station being received is displayed.

■ PTY (Program Type) mode:

The program type on the RDS station being received is

displayed. There are 15 program types to classify RDS

stations. You can make this unit search for a station which is

broadcasting a program of the desired type. Refer to page 31

for details.

■ RT (Radio Text) mode:

Information about the program (such as the title of the song,

name of the singer, etc.) on the RDS station being received

is displayed by a maximum of 64 alphanumeric characters,

including the umlaut symbol. If other characters are used for

RT data, they are displayed with under-bars.

■ CT (Clock Time) mode:

The current time is displayed and updated every minute. If

the data are accidentally cut off, “CT WAIT” may appear.

■ EON (Enhanced Other Networks):

Refer to page 32.

Changing the RDS Mode

The four modes are available in this unit for displaying RDS

data. When an RDS station is being received, PS, PTY, RT

and/or CT that correspond to the RDS data services offered

by the station light up on the display. Press RDS MODE/

FREQ repeatedly to change the display mode among the

RDS data offered by the transmitting station in the order

shown below. Illumination of the red indicator next to the

RDS mode indicator shows that the corresponding RDS

mode is now selected.

Notes

• When an RDS station is being received, do not press RDS

MODE/FREQ until one or more RDS mode indicators light up on

the display. If you press the button before the indicators light up

on the display, the mode cannot be changed. This is because the

unit has not yet received all of the RDS data on the station.

• RDS data not offered by the station cannot be selected.

• The RDS data service cannot be utilized by this unit if the

received signal is not strong enough. In particular, the RT mode

requires a large amount of data to be received, so it is possible

that the RT mode may not be displayed even if other RDS modes

(PS, PTY, etc.) are displayed.

• RDS data cannot sometimes be receive under poor reception

conditions. If so, press TUNING MODE so that the “AUTO”

indicator goes off from the display. Although the reception mode

is changed to monaural by this operation, when you change the

display to RDS mode, RDS data may be displayed.

• If the signal strength is weakened by external interference during

the reception of an RDS station, the RDS data service may be cut

off suddenly and “...WAIT” will appear on the display.

PS mode

PTY mode

RT mode

CT mode

Frequency

display mode

0107V396RDS30-33_EN 1/6/0, 7:36 PM30

VORREI COLLEGARE SUL MIO AMPLIFICATORE YAMAHA RX-V496RDS UN EQUALIZZATORE GRAFICO MA NON RIESCO. POTETE INVIARMI LO SCHEMA PER INSTALLARLO?
GRAZIE E MOLTI COMPLIMENTI
ANTONIO VICENTINI Submitted on 25-5-2022 at 17:08
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V496RDS in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha RX-V496RDS Manual

Product: