577807
101
Zoom out
Zoom in
Previous page
1/123
Next page
APPENDIX Troubleshooting En 101
Audio
Problem Cause Remedy
No sound.
Another input source is selected. Select an appropriate input source with the input selection keys.
Signals that the unit cannot reproduce are being input.
Some digital audio formats cannot be played back on the unit. To check the audio
format of the input signal, use “Signal Info” in the “Option” menu (p.74).
(RX-V577 only)
Audio output to Zone A (or Zone B) is disabled.
Press ZONE A (ZONE B) to enable audio output to Zone A (or Zone B).
The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable.
The volume cannot be increased.
The maximum volume is set. Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.86).
A device connected to the output jacks of the unit is not turned on.
(This may happen due to the nature of AV receivers.)
Turn on all devices connected to the output jacks of the unit.
No sound is coming from a specific speaker.
The playback source does not contain a signal for the channel. To check it, use “Signal Info” in the “Option” menu (p.74).
The currently selected sound program/decoder does not use the
speaker.
To check it, use “Test Tone” in the “Setup” menu (p.82).
Audio output of the speaker is disabled.
Perform YPAO (p.38) or use “Configuration” in the “Setup” menu to change the
speaker settings (p.79).
The volume of the speaker is set too low.
Perform YPAO (p.38) or use “Level” in the “Setup” menu to adjust the speaker
volume (p.81).
(RX-V577 only)
Audio output to Zone A (or Zone B) is disabled.
Press ZONE A (ZONE B) to enable audio output to Zone A (or Zone B).
The speaker cable connecting the unit and the speaker is
defective.
If there is no problem with the connection, replace with another speaker cable.
The speaker is malfunctioning.
To check it, replace with another speaker. If the problem persists, the unit may be
malfunctioning.
(RX-V577 only)
No sound is coming from the surround back
speaker.
The extended surround is disabled.
Use “Extended Surround” in the “Option” menu to select a decoder to be used
(p.73).
“Power Amp Assign” is set to “BI-AMP” or “Zone B”.
When “Power Amp Assign” in the “Setup” menu is set to “BI-AMP” or “Zone B”,
you cannot use the surround back speakers. To use the surround back speakers,
set “Power Amp Assign” to “Basic” (p.79).
No sound is coming from the subwoofer.
The playback source does not contain LFE or low-frequency
signals.
To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the
front channel low-frequency components from the subwoofer (p.80).
Subwoofer output is disabled. Perform YPAO (p.38) or set “Subwoofer” in the “Setup” menu to “Use” (p.79).
The volume of the subwoofer is too low. Adjust the volume on the subwoofer.
The subwoofer has been turned off by its auto-standby function. Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
00_RX-V477_V577_om_U.book Page 101 Monday, November 11, 2013 1:19 PM
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V477T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V477T in the language / languages: English as an attachment in your email.

The manual is 9,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V477T

Yamaha RX-V477T Quick start guide - English - 2 pages

Yamaha RX-V477T User Manual - German - 123 pages

Yamaha RX-V477T User Manual - German - 2 pages

Yamaha RX-V477T User Manual - Dutch - 123 pages

Yamaha RX-V477T Quick start guide - Dutch - 2 pages

Yamaha RX-V477T Quick start guide - Danish - 2 pages

Yamaha RX-V477T User Manual - French - 123 pages

Yamaha RX-V477T Quick start guide - French - 2 pages

Yamaha RX-V477T User Manual - Italian - 123 pages

Yamaha RX-V477T User Manual - Italian - 2 pages

Yamaha RX-V477T User Manual - Swedish - 123 pages

Yamaha RX-V477T Quick start guide - Swedish - 2 pages

Yamaha RX-V477T User Manual - Spanish - 123 pages

Yamaha RX-V477T Quick start guide - Spanish - 2 pages

Yamaha RX-V477T Quick start guide - Norwegian - 2 pages

Yamaha RX-V477T Quick start guide - Finnish - 2 pages

Yamaha RX-V477T User Manual - Finnish - 119 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info