464156
56
Zoom out
Zoom in
Previous page
1/165
Next page
54 En
FM/AM tuning
You can use the automatic preset tuning feature to store up
to 40 FM stations with strong signals (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups) in
order. You can then recall any preset station easily by
selecting the preset station number.
1 Rotate the
C
INPUT selector on the front
panel to select “TUNER” as the input source.
2 Press
J
FM/AM to select “FM” as the
reception band.
“FM” appears in the front panel display.
3 Press and hold
K
MEMORY for more than 3
seconds.
The preset station number as well as the AUTO and
MEMORY indicators flashes. After approximately 10
seconds, automatic presetting starts from the current
frequency and proceeds toward higher frequencies.
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
y
You can specify the preset number from which this unit
stores FM stations. Press
G
A/B/C/D/E and then
H
PRESET/TUNING l / h repeatedly after you
perform step 3 to select the preset station number under
which the first station will be stored.
You can begin tuning toward lower frequencies to store FM
stations automatically. Press
I
PRESET/TUNING
so that
the colon (:) disappears from the front panel display and
then press
H
PRESET/TUNING
l
after pressing and
holding
K
MEMORY
for more than 3 seconds.
Any stored station data existing under a preset station
number is cleared when you store a new station under the
same preset station number.
If the number of received stations does not reach 40 (E8),
automatic preset tuning automatically stops after
searching for all the available stations.
Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station
you want to store is weak in signal strength, tune into it
manually and store it as described in “Manual preset
tuning”.
(Europe model only) Only Radio Data System
broadcasting station are stored automatically by automatic
preset tuning.
You can also store up to 40 stations (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups)
manually.
1 Tune into a station automatically or manually.
See page 53 for tuning instructions.
2 Press
K
MEMORY.
The MEMORY indicator flashes in the front panel
display for approximately 10 seconds.
3 Press
G
A/B/C/D/E repeatedly to select a
preset station group (A to E) while the
MEMORY indicator is flashing.
The selected preset station group letter appears.
Check that the colon (:) appears in the front panel
display.
4 Press
H
PRESET/TUNING l / h to select a
preset station number (1 to 8) while the
MEMORY indicator is flashing.
•Press
H
h to select a higher preset station number.
•Press
H
l to select a lower preset station number.
Automatic preset tuning
Notes
AUTO
MEMORY
A1:FM 88.90MHz
Flashes Flashes
Manual preset tuning
MEMORY
Flashes
MEMORY
A :FM 88.90MHz
Preset station group
FlashesColon (:)
MEMORY
A1:FM 88.90MHz
Preset station number
Flashes
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V3800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V3800 in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V3800

Yamaha RX-V3800 User Manual - English, German, Dutch, French, Swedish - 905 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info