464156
43
Zoom out
Zoom in
Previous page
1/165
Next page
Playback
41 En
BASIC
OPERATION
English
1 Turn on the video monitor connected to this
unit.
y
You can control this unit by using the graphical user
interface (GUI) screen. See page 44 for details.
You can turn on or off the short message displays on the
video monitor. See page 87 for details.
2 Rotate the
C
INPUT selector (or set the
operation mode selector to
D
AMP and then
press one of the input selector buttons (1))
to select the desired input source.
The name of the currently selected input source
appears in the front panel display and in the short
message display for a few seconds.
3 Start playback on the selected source
component or select a broadcast station.
Refer to the instruction manuals for the source
component.
See page 53 for details about FM/AM tuning
instructions.
See page 59 for details about the iPod operation
with this unit.
See page 61 for details about playback of Internet
Radio programs and the music contents in the PC
or USB memory devices.
4
Rotate
R
VOLUME
(or press
C
VOLUME +/
)
to adjust the volume to the desired output level.
Control range: Mute, –80.0 dB (minimum) to
+16.5 dB (maximum)
y
See page 52 to adjust the level of each speaker.
5 Rotate the
O
PROGRAM selector on the
front panel (or press one of the sound field
program selector buttons (O) repeatedly) to
select the desired sound field program.
The name of the selected sound field program appears
in the front panel display and in the short message
display. See page 45 for details about sound field
programs.
Sound field programs cannot be selected when the
component connected to the MULTI CH INPUT jacks is
selected as the input source (see page 42).
y
Choose a sound field program based on your listening
preference, not merely on the name of the program.
When you select an input source, this unit automatically
selects the last sound field program used with the
corresponding input source.
Playback
Caution
Extreme caution should be exercised when you play
back CDs encoded in DTS. If you play back a CD
encoded in DTS on a DTS-incompatible CD player,
you will only hear some unwanted noise that may
damage your speakers. Check whether your CD player
supports CDs encoded in DTS. Also, check the sound
output level of your CD player before you play back a
CD encoded in DTS.
y
To play DTS-encoded CDs when using a digital audio
connection, set “Decoder Mode” in “Input Select” to “DTS”
before playback (see page 79).
Before performing the following operations, set the operation
mode selector on the remote control to
D
AMP.
Basic procedure
CD-R
CD
PHONO
MULTI CH
TUNER
MD/TAPE
BD/HD DVD
DVD
DVR
DTV/CBL
VCR
V-AUX
NET/USB
DVD
Currently selected input source
Available input sources
Note
Movie
Sci-Fi
Currently selected sound field program
Currently selected sound field program category
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V3800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V3800 in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V3800

Yamaha RX-V3800 User Manual - English, German, Dutch, French, Swedish - 905 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info