464156
35
Zoom out
Zoom in
Previous page
1/165
Next page
33 En
Connections
PREPARATION
English
Before using this unit, set the speaker impedance of the
connected speakers and the language of the menu items
and messages, that appears in the GUI (graphical user
interface) screen of this unit.
1 Make sure this unit is turned off.
2 Press and hold
P
STRAIGHT on the front
panel and then press
A
MASTER ON/OFF
inward to the ON position to turn on this unit.
This unit turns on, and the advanced setup menu (see
page 120) appears in the front panel display.
3 Rotate the
O
PROGRAM selector to select
“SPEAKER IMP.”.
4 Press
P
STRAIGHT repeatedly to select
“6MIN”.
5 Rotate the
O
PROGRAM selector to select
“GUI LANGUAGE”.
6 Press
P
STRAIGHT repeatedly to select the
desired language setting for the GUI screen
in the video monitor.
Choices: ENGLISH (English), JAPANESE
(Japanese), FRENCH (French), GERMAN
(German), SPANISH (Spanish), RUSSIAN
(Russian)
This setting does not affect to the messages that appear in the
front panel display.
You can also select the GUI language by using GUI screen. See
page 97 for details.
7 Press
A
MASTER ON/OFF to release it
outward to the OFF position to save the new
setting and turn off this unit.
The setting you made is reflected next time you turn
on this unit.
Turning on this unit
Press
A
MASTER ON/OFF on the front panel
inward to the ON position to turn on this unit.
When you turn on this unit by pressing
A
MASTER ON/
OFF, the main zone is turned on.
y
When you turn on this unit, there will be a delay for a few
seconds before this unit can reproduce sound.
Turning off this unit
Press
A
MASTER ON/OFF on the front panel
again to release it outward to the OFF position to
turn off this unit.
B
MAIN ZONE ON/OFF on the front panel as well as
9
POWER and
8
STANDBY on the remote control are
operational only when
A
MASTER ON/OFF is pressed
inward to the ON position.
Basically, we recommend that you use the standby mode to turn
off this unit.
Set the main zone to the standby mode
Press
B
MAIN ZONE ON/OFF
(or
8
STANDBY
)
to set the main zone to the standby mode.
In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control.
Turning on the main zone from the
standby mode
Press
B
MAIN ZONE ON/OFF (or
9
POWER) to
turn on the main zone.
y
When you turn on this unit, there will be a delay for a few
seconds before this unit can reproduce sound.
These buttons are operational only when
A
MASTER ON/
OFF is pressed inward to the ON position.
Setting the speaker impedance
and GUI language
Caution
If you are to use 6-ohm speakers, set “SPEAKER IMP.”
to “6MIN” as follows BEFORE using this unit. You
can also use 4-ohm speakers as the front speakers.
Notes
EFFECT
STRAIGHT
MASTER
While holding
down
Turning this unit on and off
Notes
If there are some problems...
First, turn off and then turn on this unit again.
If problems persist, initialize the parameters of this
unit. See page 134 for details.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V3800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V3800 in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V3800

Yamaha RX-V3800 User Manual - English, German, Dutch, French, Swedish - 905 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info