63074
25
Zoom out
Zoom in
Previous page
1/395
Next page
23 En
Optimizing the speaker setting for your listening room (YPAO)
PREPARATION
English
4 Press
J
l / h to select “AUTO”.
Choices: AUTO, RELOAD, UNDO, DEFAULT
Select “AUTO” to automatically run the entire
“AUTO SETUP” procedure.
Select “RELOAD” to reload the last “AUTO
SETUP” settings and override the previous
settings.
Select “UNDO” to undo the last “AUTO SETUP”
settings and restore the previous settings.
Select “DEFAULT” to reset the “AUTO SETUP”
parameters to the initial factory settings.
“RELOAD” or “UNDO” is available only when you have
previously run “AUTO SETUP” and confirmed the results.
5 Press
J
ENTER to start the setup
procedure.
This unit starts the automatic setup procedure. Loud
test tones are output from each speaker during the
auto setup procedure. Once all items are set, the
“FINISH” display appears in the front panel display.
y
To cancel the automatic setup procedure, press
J
k.
During the
automatic setup procedure, do not perform
any operation on this unit.
We recommend that you get out of the room while this unit
is in the auto setup procedure. It takes approximately 3
minutes for this unit to complete the auto setup procedure.
6 Once all measurement items successfully,
“FINISH” appears in the front panel display.
The speaker for which the result of the automatic
setup appears automatically changes in order.
y
To display the result of the automatic setup again, press
J
k / n repeatedly.
If you selected “RELOAD” in step 4, no test tones are
output.
If an error occurs during the “AUTO:CHECK” procedure,
the setup procedure is canceled and an error screen
appears. For details, see “If an error screen appears” on
page 24.
When this unit detects potential problems during the
“AUTO SETUP” procedure, “WARNING” and the
warning messages appears after this unit displays the
result of the automatic setup. For details, refer to the
“AUTO SETUP” section in “Troubleshooting” on
page 55.
The distance measurement result may be longer than the
actual distance depending on the characteristics of your
subwoofer.
7 Press
J
l / h to select “SET” or “CANCEL”.
Choices: SET, CANCEL
Select “SET” to confirm the “AUTO SETUP”
results.
Select “CANCEL” to cancel the “AUTO SETUP”
results.
Note
Notes
INITIALIZING
WIRING/LEVEL
DISTANCE
SIZE
FINISH
Notes
FL: 3.3m +2
The distance between the speaker
and the listening position
Speaker
FL/FR: Front left/right
C: Center
SL/SR: Surround left/right
SW: Subwoofer
The result of the
adjustment of the
volume level
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V363 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V363 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 6,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V363

Yamaha RX-V363 User Manual - English - 77 pages

Yamaha RX-V363 User Manual - Dutch - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info