558959

Yamaha RX-V359 Manual

47
Zoom out
Zoom in
Previous page
1/338
Next page
45
SET MENU
ADVANCED
OPERATION
English
Use the remote control to access and adjust each
parameter.
y
• You can change the “SET MENU” parameters while this unit is
reproducing sound.
• You can use NEXT (A/B/C/D/E) and SET MENU +/–
(PRESET/TUNING l / h) on the front panel to change these
settings, if “TUNER” is not selected as the input source. Press
NEXT to select the category or field you wish to change, and
SET MENU +/– to change the parameters.
1 Press SET MENU repeatedly to display the
desired menu and then press + to enter the
menu.
y
Once you press SET MENU, you can also select the menu
by pressing u / d.
2 Press u / d repeatedly to select the item and
then press +/– to change the parameter.
Depending on the menu item, press u / d to select a
sub item, and then press +/– to change the parameter.
3 To exit, press u / d repeatedly until the
menu disappears.
Use this menu to manually adjust any speaker settings.
• If you select “SETUP” (see page 20) and then select “SET”
after adjusting the “SOUND MENU” parameters, the “SETUP”
parameters override the “SOUND MENU” parameters. Do not
enter “SETUP” unless you wish to change the “SOUND
MENU” parameters. If you accidentally enter “SETUP”, select
“CANCEL” to exit from “SETUP”.
• Some menu item settings have no effect when the unit is
reproducing a source with a digital signal sampling frequency
greater than 48 kHz.
■ Speaker settings 1 SPEAKER SET
Use this feature to manually adjust any speaker setting.
y
If you are not satisfied with the bass sounds from your speakers,
you can change these settings according to your preference.
Center speaker 1A CENTER
Choices: LRG (large), SML (small), NON (none)
• Select “LRG” if you have a large center speaker. The
entire range of the center channel signals is directed to
the center speaker.
• Select “SML” if you have a small center speaker. The
low-frequency signals of the center channel are
directed to the speakers selected with “1D BASS”.
• Select “NON” if you do not have a center speaker. The
entire range of the center channel signals is directed to
the front left and right speakers.
Front speakers 1B FRONT
Choices: LRG (large), SML (small)
• Select “SML” if you have small front speakers. The
low-frequency signals of the front channel are directed
to the speakers selected with “1D BASS”.
• Select “LRG” if you have large front speakers. The
entire range of the front left and right channel signals is
directed to the front left and right speakers.
Using SET MENU
TEST
VOLUME
PROG PROG
SET MENU
LEVEL
VOLUME
MUTE
STRAIGHT
1
2,3
SOUND MENU
Notes
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V359 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V359 in the language / languages: English, German, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 5,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info