558959

Yamaha RX-V359 Manual

28
Zoom out
Zoom in
Previous page
1/338
Next page
26
PLAYBACK
■ Selecting the input modes
This unit comes with a variety of input jacks. Do the
following to select the type of input signals you want to
use.
y
• We recommend setting “INPUT MODE” to “AUTO” in most
cases.
• You can adjust the default input mode of this unit by using the
“INPUT MODE” parameter in “INPUT MENU” (see page 47).
• To play DTS-encoded CDs when using a digital audio
connection, be sure to set “INPUT MODE” to “DTS”.
• Depending on the player, DTS decoding may not be performed
correctly even if you make a digital connection between this
unit and the player.
1 Press INPUT l / h on the front panel to
select the desired input source.
2 Press INPUT MODE on the front panel
repeatedly to select the desired input mode.
AUTO Automatically selects input signals in
the following order:
1) Digital signals
2) Analog signals
DTS Selects only digital signals encoded in
DTS. If no DTS signals are input, no
sound is output.
ANALOG Selects only analog signals. If no
analog signals are input, no sound is
output.
When “INPUT MODE” is set to “AUTO”, this unit
automatically switches to the appropriate decoder if a Dolby
Digital or DTS signal is detected.
■ Adjusting speaker levels during
playback
You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources input at the MULTI CH INPUT jacks.
1 Press LEVEL repeatedly to select the
speaker you want to adjust.
• Select “FRONT L” to adjust the front left speaker
output level.
• Select “CENTER” to adjust the center speaker
output level.
• Select “FRONT R” to adjust the front right speaker
output level.
• Select “SUR. R” to adjust the surround right
speaker output level.
• Select “SUR. L” to adjust the surround left speaker
output level.
• Select “SWFR” to adjust the subwoofer output
level.
y
Once you press LEVEL on the remote control, you can also
select the speaker by pressing u / d.
2 Press +/– on the remote control to adjust the
speaker output level.
The control range is from +10 dB to –10 dB for the
center and surround speakers, and from 0 dB to
–20 dB for the front speakers and subwoofer.
• This operation will override the level adjustments made in
“SETUP” (see page 20).
• You cannot adjust speaker levels if “SPEAKER SET” in
“SOUND MENU” (see page 45) is set to “NONE”.
• You cannot adjust the subwoofer level if “BASS” in
“SPEAKER SET” (see page 45) in the set menu is set to
“FRNT”.
• If you use LEVEL to adjust speaker levels, the speaker levels
you previously set with the test tone will also change.
• If you select “SETUP” (see page 20) and then select “SET”,
speaker levels change in response to any changes you make in
“SETUP”.
Notes
Note
INPUT
INPUT MODE
VCR
V-AUX
DTV/CBL
DVD
MD/CD-R
TUNER CD
DVD AUTO
Currently selected
input source
Currently selected
input mode
Currently selected
input sources
Notes
LEVEL
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V359 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V359 in the language / languages: English, German, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 5,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info