558958
23
Zoom out
Zoom in
Previous page
1/58
Next page
21
PREPARATION English
Setting the unit to match your
speaker system
Follow the instructions below to set the amplifier output
to match the size of your room and speakers. Press u / d
to cycle through parameters 1 through 4, and –/+ to alter
the parameter setting.
Factory default settings are highlighted.
1 ROOM
Settings: S, M, L
Select the size of the room you have installed your
speakers in. Roughly speaking, the room sizes are
defined as follows:
S: 3.6 x 2.8 m, 10 m
2
M: 4.8 x 4.0 m, 20 m
2
L: 6.3 x 5.0 m, 30 m
2
2 SUBWOOFER
Settings: YES, NONE
Select YES if you have a subwoofer in your system,
or NONE if you do not.
3 SPEAKERS
Settings: 2, 3, 4, 5 (spk)
Select the number of speakers connected in your
speaker configuration. This number does not include
your subwoofer.
BASIC SYSTEM SETTINGS
4 SET or CANCEL
Select SET to confirm the changes you made. Select
CANCEL to exit SETUP MENU without altering any
of the unit settings. The unit will output a test tone to
the speakers (see
5
).
5 Use the test tone to check the speaker levels.
When you select SET in
4
, the display changes to
“CHECK:TestTone” for a few seconds, and the unit
outputs a test tone to each of the speakers in turn
twice. When the test tone begins, the display changes
to “CHECK OK?--YES”.
If the test tone is output at the same volume from all
of the speakers, select “CHECK OK?--YES”. Press
d to exit from the SETUP menu.
If the volume of the test tone varies between speakers,
press –/+ to change the display to “NO”.
Note
The indicator of the speaker currently outputting the test tone
flashes on the front panel display.
SP LEVEL
(Setting speaker output levels)
Use this menu to compare and adjust the test tone output
from each speaker to the output from the front left (or
surround left) speaker so that the volume level for all
speakers is identical. Press u / d to select a speaker,
then adjust the balance using –/+.
Note
The unit outputs the test tone from the selected speaker and
the front left (or surround left) speaker in turn. The indicator
of the speaker currently outputting the test tone flashes on the
front panel display.
1 FL-R
Adjust the balance between the front left and right
speakers.
2 C
Adjust the balance between the front left and center
speakers.
3 SL
Adjust the balance between the front left and
surround left speakers.
4 SR
Adjust the balance between the surround left and
surround right speakers.
5 SWFR
Adjust the balance between the front left speaker and
the subwoofer.
y
You can also balance the speaker levels using test tone by
pressing TEST on the remote control.
Setting
2spk
3spk
4spk
5spk
Display
L R
L C R
L R
SL SR
L C R
SL SR
Speaker
Front L/R
Front L/R,
Center
Front L/R,
Surround L/R
Front L/R, Center,
Surround L/R
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V357 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V357 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V357

Yamaha RX-V357 User Manual - German - 58 pages

Yamaha RX-V357 User Manual - Dutch - 58 pages

Yamaha RX-V357 User Manual - French - 58 pages

Yamaha RX-V357 User Manual - Swedish - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info