558955
98
Zoom out
Zoom in
Previous page
1/107
Next page
96
TROUBLESHOOTING
Problem Cause Remedy
Refer to
page
The sound suddenly
goes off.
The protection circuitry has been activated
because of a short circuit, etc.
Check that the impedance selector setting is correct.
25
Check the speaker wires are not touching each other
and then turn this unit back on.
The sleep timer has turned the unit off. Turn on the power, and play the source again.
The sound is muted. Press MUTE to cancel a mute.
34
Only the speaker on
one side can be
heard.
Incorrect cable connections. Connect the cables properly. If the problem persists,
the cables may be defective.
17
Incorrect balance settings in the GUI
menu.
Adjust the Speaker Level settings.
64
Only the center
speaker outputs
substantial sound.
When playing a monaural source with a
CINEMA DSP program, the source signal
is directed to the center channel, and the
front and surround speakers output effect
sounds.
No sound from the
effect speakers.
The sound field programs are turned off. Press STRAIGHT/EFFECT to turn them on.
38
You are using a source or program
combination that does not output sound
from all channels.
Try another sound field program.
33
No sound from the
center speaker.
The output level of the center speaker is
set to minimum.
Raise the level of the center speaker.
64
Center is set to “None” in Speaker Set. Select the appropriate setting for the center speaker.
61
One of the HiFi DSP programs (except for
7ch Stereo) has been selected.
Try another sound field program.
33
No sound from the
surround speakers.
The output level of the surround speakers
is set to minimum.
Raise the output level of the surround speakers.
64
Surround is set to “None” in Speaker Set. Select the appropriate setting for the surround left and
right speakers.
62
A monaural or stereo source is being
played with STRAIGHT.
Press STRAIGHT/EFFECT to turn on the sound
fields.
No sound from the
surround back
speakers.
Presence speakers are selected. Select “Surround Back” in PR/SB Select.
60
Surround is set to “None” in Speaker Set. If the surround left and right speakers are set to
“None”, surround back speakers are automatically set
to “None”. Select the appropriate setting for the
surround left and right speakers.
62
Surround Back is set to “None” in Speaker
Set.
Select “Small x1”, “Small x2”, “Large x1” or
“Large x2”.
62
No sound from the
subwoofer.
Bass Out is set to “Front” when a Dolby
Digital or DTS signal is being played.
Select “SWFR” or “Both”.
63
Bass Out is set to “SWFR” or “Front”
when a 2-channel source is being played.
Select “Both”.
63
The source does not contain low bass
signals.
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V2500 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V2500

Yamaha RX-V2500 User Manual - German - 107 pages

Yamaha RX-V2500 User Manual - Dutch - 107 pages

Yamaha RX-V2500 User Manual - French - 107 pages

Yamaha RX-V2500 User Manual - Italian - 107 pages

Yamaha RX-V2500 User Manual - Swedish - 107 pages

Yamaha RX-V2500 User Manual - Spanish - 107 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info