558955
37
Zoom out
Zoom in
Previous page
1/107
Next page
35
English
PLAYBACK
BASIC
OPERATION
Selecting the MULTI CH INPUT
Press MULTI CH INPUT so that “MULTI CH INPUT”
appears in the front panel display and video monitor.
When “MULTI CH INPUT” is shown on the front panel display
and/or the video monitor, no other source can be played. To select
another input source with INPUT (one of the input selector
buttons), press MULTI CH INPUT to turn off “MULTI CH
INPUT” from the front panel display and the video monitor.
Enjoying multi-channel software in
6.1/7.1 channel surround
If you connected one or two surround back speakers, use
this feature to enjoy 6.1/7.1-channel playback for multi-
channel sources using the Dolby Pro Logic IIx, Dolby
Digital EX or DTS-ES decoders.
Set AMP/SOURCE/TV to AMP, then press EXTD.
SUR on the remote control to switch between 5.1
and 6.1/7.1 channel playback.
To select a decoder, press l / h repeatedly
when PLIIxMovie (etc.) is displayed.
Auto (AUTO)
When a signal (flag) that can be recognized by the unit is
input, the unit selects the optimum decoder for playing
back the signal in 6.1/7.1 channels.
If the unit cannot recognize the flag or no flag is present in
the input signal, it cannot automatically be played in 6.1/
7.1 channels.
Decoders (select with l / h)
You can select from the following modes depending on the
format of the software you are playing.
PLIIxMovie
For playing back Dolby Digital or DTS signals in 7.1
channels using the Pro Logic IIx movie decoder.
PLIIxMusic
For playing back Dolby Digital or DTS signals in 6.1/7.1
channels using the Pro Logic IIx music decoder.
EX/ES
For playing back Dolby Digital signals in 6.1/7.1 channels
using the Dolby Digital EX decoder.
DTS signals are played back in 6.1/7.1 channels using the
DTS-ES decoder.
EX
For playing back Dolby Digital or DTS signals in 6.1/7.1
channels using the Dolby Digital EX decoder.
Off (OFF)
For playing back Dolby Digital or DTS signals in 5.1
channels.
y
When Surround Back is set to “Large x1” or “Small x1” (see
page 62), the surround back channel will output from the left
SURROUND BACK speaker terminals.
Some 6.1-channel compatible discs do not have a signal (flag)
which this unit can automatically detect. When playing these
kinds of discs with 6.1-channel, select decoders (PLIIxMovie,
PLIIxMusic, EX/ES or EX) manually.
6.1/7.1-channel playback is not possible even if EXTD. SUR is
pressed in the following cases:
When Surround or Surround Back is set to “None” (see
page 62).
When the source connected to the MULTI CH INPUT jack is
being played.
When the source being played does not contain surround L/R
channel signals.
When a Dolby Digital KARAOKE source is being played.
When 2ch Stereo, 7ch Stereo or PURE DIRECT is selected.
When the power of this unit is turned off, the input mode will be
reset to AUTO.
The Pro Logic IIx decoder is not available when Surround Back
is set to “None” (see page 62).
“PLIIxMovie” cannot be selected when Surround Back is set to
“Large x1” or “Small x1” (see page 62).
Note
MULTI CH
INPUT
MULTI CH IN
Front panel Remote control
or
EXTD. SUR
8
Notes
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V2500 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V2500

Yamaha RX-V2500 User Manual - German - 107 pages

Yamaha RX-V2500 User Manual - Dutch - 107 pages

Yamaha RX-V2500 User Manual - French - 107 pages

Yamaha RX-V2500 User Manual - Italian - 107 pages

Yamaha RX-V2500 User Manual - Swedish - 107 pages

Yamaha RX-V2500 User Manual - Spanish - 107 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info