464170
65
Zoom out
Zoom in
Previous page
1/356
Next page
61 En
English
INTRODUCTION
ADDITIONAL
INFORMATION APPENDIX
PREPARATION
BASIC
OPERATION
ADVANCED
OPERATION
You can control external components for a selected input source with the remote control. The keys available for
controlling external components are as follows:
cSOURCE POWER
Turns on and off an external component.
jCursor, ENTER, RETURN
Operates the menus of external components.
kExternal component operation keys
Function as a recording or playback key of an external
component, or a menu display key.
lNumeric keys
Function as numeric keys of an external component.
mTV control keys
uDISPLAY
Switches between the screens of external components.
y
You can use mTV control keys to control your TV regardless of a
selected input source if a remote control code for your TV is assigned to
dAV1, dAV4 or dPHONO (in the order of descending priorities).
You need to set the remote control code first to control external
components.
The remote control keys for controlling external components are
available only when the external components have corresponding control
keys.
The following remote control codes are assigned to input
sources as factory default settings.
Default remote control code settings
“—” indicates no assignment
y
An external component controlled by the remote control is automatically
selected according to selection of the scenes (page 24).
You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.
You should perform each step within 1 minute after the
previous step.
1 Press oCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
nTRANSMIT blinks twice.
2 Press the desired dInput selection key.
To use mTV control keys to control your TV,
assign a remote control code for your TV to dAV1,
dAV4 or dPHONO.
3 Press lNumeric keys to enter a remote
control code.
Once the remote control code is registered,
nTRANSMIT blinks twice. If it fails,
nTRANSMIT blinks six times. Repeat from
step 1.
You can reset all remote control codes to the factory
default settings.
Note
This operation also clears the programmed function of each key
(page 62).
1 Press oCODE SET on the remote control
using a pointed object such as a tip of a
ballpoint pen.
nTRANSMIT blinks twice.
2 Press iON SCREEN.
3 Press lNumeric keys to enter “9981”.
Once the initialization is complete, nTRANSMIT
blinks twice. If it fails, nTRANSMIT blinks six
times. Repeat from step 1.
Controlling other components with the remote control
INPUT Switches visual inputs of TV
MUTE Mutes audio of TV
TV VOL +/– Controls the volume of TV
TV CH +/– Switches channels of TV
POWER Turns on and off TV
Input source Category Manufacturer
Default
code
[HDMI 1] Blu-ray Disc Yamaha 2018
[HDMI 2]
[HDMI 3]
[HDMI 4]
[AV 1]
[AV 2]
[AV 3] CD Yamaha 5013
[AV 4]
[AV 5]
[AV 6]
[AUDIO 1]
[AUDIO 2]
[V-AUX]
[PHONO]
[MULTI]
[DOCK] DOCK Yamaha 5011 (fixed)
[TUNER] Tuner Yamaha 5007 (fixed)
[USB/NET] Yamaha — (fixed)
Setting remote control codes
Resetting all remote control codes
Input source Category Manufacturer
Default
code
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V2065 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V2065 in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 13,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V2065

Yamaha RX-V2065 User Manual - English - 444 pages

Yamaha RX-V2065 User Manual - English - 100 pages

Yamaha RX-V2065 User Manual - German, Dutch, French, Swedish - 444 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info