464170
36
Zoom out
Zoom in
Previous page
1/100
Next page
32 En
FM/AM tuning
y
You can select the preset number at which the preset starts by
pressing ePRESET k / n or jCursor k / n while “READY
is displayed on the front panel display.
To cancel registration, press jRETURN.
During the automatic station preset, “MEMORY”
appears in the front panel display each time a station
is registered.
When registration is complete, “FINISH” appears
and then the display returns to the Option menu.
To return the display to the original state, press
sOPTION.
You can manually register FM stations with weak signals
or AM stations.
1 Tune in to the desired station (page 31).
2 Press GMEMORY (or eMEMORY).
“Manual Preset” appears on the front panel display,
followed soon by the preset number to which the
station will be registered.
y
By holding down GMEMORY (or eMEMORY) for more than
2 seconds, you can skip the following steps and automatically
register the selected station to an empty preset number (next to the
lastly-registered preset number).
3 Press FPRESET l / h (or ePRESET k / n)
to select the preset number to which the
station will be registered.
When you select a preset number to which no station
is registered, “Empty” appears. When you select a
preset number to which any station has been already
registered, the frequency of the station is displayed.
y
You can also select a preset number using the lNumeric
keys.
4 Press GMEMORY (or eMEMORY).
When registration is complete, the display returns to
the original state.
y
To cancel registration, press jRETURN or leave this unit
without any operations for about 30 seconds.
You can call preset stations registered by automatic station
preset or manual station preset.
Press FPRESET l / h (or ePRESET k / n) to
select a preset number.
y
Preset numbers to which no stations are registered are skipped.
“No Presets” or “No Presets in Memory” is displayed if no stations are
registered.
You can directly select a preset number by pressing lNumeric keys
while calling a preset station. “Empty” appears on the display if you
enter a preset number to which no station is registered. “Wrong Num.
appears if you enter an invalid number.
When you press lNumeric keys during normal tuning, a frequency
is entered. Set tuning mode to preset tuning mode using FPRESET l
/ h (or ePRESET k / n) prior to the operation.
1 Rotate the TINPUT selector (or press
dTUNER) to select “TUNER” as the input
source.
2 Press sOPTION on the remote control.
The Option menu for “TUNER” is displayed
(page 43).
3 Press jCursor k / n to select “Clear Preset”
and then press jENTER.
y
To cancel the operation and return to the Option menu, press
jRETURN.
4 Press jCursor k / n to select a preset
number to reset and then press jENTER.
The preset station registered to the selected preset
number is cleared. To clear the registration of
multiple preset numbers, repeat step 4.
5 To exit the Option menu, press sOPTION.
Registering stations by manual station
preset
01:FM87.50MHz
Preset number Frequency
Status
01:Empty
Flashes
Frequency to be registered
Preset
number
Calling a preset station (Preset tuning)
Clearing preset stations
01:FM92.50MHz
Preset number
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V2065 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V2065 in the language / languages: English as an attachment in your email.

The manual is 6,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V2065

Yamaha RX-V2065 User Manual - English - 356 pages

Yamaha RX-V2065 User Manual - English, German, Dutch - 444 pages

Yamaha RX-V2065 User Manual - French - 356 pages

Yamaha RX-V2065 User Manual - French - 444 pages

Yamaha RX-V2065 User Manual - Italian - 356 pages

Yamaha RX-V2065 User Manual - Swedish - 444 pages

Yamaha RX-V2065 User Manual - Spanish - 356 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info