464154
97
Zoom out
Zoom in
Previous page
1/751
Next page
93 En
ADVANCED
OPERATION
English
This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional
operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening environment.
Only
A
MASTER ON/OFF,
O
STRAIGHT and the
N
PROGRAM selector are effective while you are using the advanced setup
menu.
All the other operations cannot be made while you are using the advanced setup menu.
The advanced setup menu is only available in the front panel display.
1 Press
A
MASTER ON/OFF on the front
panel to release it outward to the OFF
position to turn off this unit.
2 Press and hold
O
STRAIGHT and then
press
A
MASTER ON/OFF inward to the ON
position to turn on this unit.
This unit turns on, and “ADVANCED SETUP”
appears in the front panel display.
3 Rotate the
N
PROGRAM selector to select
the parameter you want to adjust.
4 Press
O
STRAIGHT repeatedly to change
the selected parameter setting.
5 Press
A
MASTER ON/OFF to release it
outward to the OFF position to save the new
setting and turn off this unit.
y
The settings you made are reflected next time you turn on this
unit.
Speaker impedance SPEAKER IMP.
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Remote sensor REMOTE SENSOR
Use this feature to activate or deactivate the signal-
receiving capability of the remote control sensor on the
front panel of this unit.
We recommend setting the parameter to “ON” in most cases.
Wake on RS-232C access
RS-232C STANDBY
Use this feature to set this unit to transmit data via the RS-
232C interface when this unit is in the standby mode.
Initial setting:
[U.S.A. and Canada models]: YES
[Other models]: NO
Remote control ID setting
REMOTE CON AMP
Use this feature to set the remote control ID of this unit for
remote control recognition.
Setting remote control ID
Use this feature to set the remote control ID. This feature
is useful when you control multiple Yamaha AV receiver
or amplifier with using the remote control.
Advanced setup
Notes
Using the advanced setup menu
Choice Descriptions
8ΩMIN
Select this setting to set the speaker impedance to
8 Ω. The impedance of each speaker must be 8 Ω
or higher.
6ΩMIN
Select this setting to set the speaker impedance to
6 Ω. The impedance of each speaker must be 6 Ω
or higher (front speakers only: 4 Ω or higher).
EFFECT
STRAIGHT
MASTER
While holding
down
Choice Descriptions
ON
Select this setting if you want to activate the
signal-receiving capability of the remote control
sensor.
OFF
Select this setting if you want to deactivate the
signal-receiving capability of the remote control
sensor.
Note
Choice Functions
YES
Select this setting to set this unit to transmit data
via the RS-232C interface.
NO
Select this setting to set this unit not to transmit
data via the RS-232C interface.
Choice Descriptions
ID1
Select this setting when the ID of the remote
control is set to “ID1”
ID2
Select this setting when the ID of the remote
control is set to “ID2”
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V1900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V1900 in the language / languages: German, Dutch, French, Swedish as an attachment in your email.

The manual is 19,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V1900

Yamaha RX-V1900 User Manual - English - 506 pages

Yamaha RX-V1900 User Manual - English - 751 pages

Yamaha RX-V1900 User Manual - French, Italian, Spanish - 506 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info