558953
80
Zoom out
Zoom in
Previous page
1/123
Next page
78
MANUAL SETUP
Use to manually adjust the optional system settings.
Display set A)DISPLAY SET
Use this feature to adjust the display settings.
The parameter settings for DISPLAY SET (except for the
DIMMER setting) can be initialized to the factory presets. Use
the V-RESET feature in the ADVANCED SETUP menu (see
page 84).
Dimmer DIMMER
Use to adjust the brightness of the front panel display.
Choices: –4 to 0
OSD shift OSD SHIFT
Use to adjust the vertical position of the OSD.
Choices: +5 (downward) to –5 (upward)
Initial setting: 0
Press h to lower the position of the OSD.
Press l to raise the position of the OSD.
Gray back GRAY BACK
Choices: AUTO, OFF
Select AUTO to display a gray background in the OSD
when there is no video signal being input.
Select OFF not to display a gray background even
when there is no video signal being input.
Video conversion V CONV.
Use this feature to activate or deactivate the component
interlace/progressive conversion as well as the HDMI
interlace/progressive up-conversion of the analog video
signals input at the composite video, S-video and
component video jacks.
Choices: ON, OFF
Select ON to activate the component interlace/
progressive conversion as well as the HDMI interlace/
progressive up-conversion of the analog video signals.
Select OFF to deactivate the component interlace/
progressive conversion as well as the HDMI interlace/
progressive up-conversion of the analog video signals.
y
When using the THX system, we recommend setting V CONV. to
OFF.
The OSD is not displayed when V CONV. is set to OFF.
Even when V CONV. is set to ON, HDMI digital signals are not
converted to analog video signals.
If V CONV. is set to OFF, the CMPNT I/P and HDMI I/P
features are deactivated.
Converted video signals are only output at the MONITOR OUT
jacks. When recording you must make the same type of video
connections (composite or S-video) between each component.
When converting composite video or S-video signals from a
VCR to component video signals, the picture quality may suffer
depending on your VCR.
Unconventional signals input at the composite video, S-video or
component video jacks cannot be converted even if V CONV. is
set to ON.
If unconventional signals are being input at the composite
video, S-video or component video jacks, the video output may
be abnormal as a result. In such cases, set V CONV. to OFF.
Component interlace/progressive conversion
CMPNT I/P
Use this feature to activate or deactivate the analog I/P
conversion of the analog video signals input at the
composite video, S-video and component video jacks so
that the analog video signals deinterlaced from 576i to
576p are output at the MONITOR OUT jacks.
Choices: ON, OFF
Select ON to activate the analog I/P conversion of the
analog video signals.
Select OFF to deactivate the analog I/P conversion of
the analog video signals.
This menu item is not available and hence not visible in the
OSD if V CONV. is set to OFF.
If your video monitor does not support the analog video signals
with 576p of resolution, the SET MENU items may not be
displayed on your video monitor when CMPNT I/P is set to
ON.
Using OPTION MENU
Note
. A)DISPLAYSET
B)MEMORY GUARD
C)AUDIO SELECT
D)DECODER MODE
4
OPTION
MENU 1/2
[]/[]:Up/Down
[ENTER]:Enter
p
p
. E)PARAM. INI
F)ZONE SET
4
OPTION
MENU 2/2
[]/[]:Up/Down
[ENTER]:Enter
p
p
. DIMMER;;;;;;;0
OSD SHIFT;;;;0
GRAY BACK;AUTO
V CONV.;;;;;ON
A)DISPLAY SET
[]/[]:Up/Down
[<]/[>]:Adjust
p
p
Notes
Notes
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-V1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-V1600 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-V1600

Yamaha RX-V1600 User Manual - German - 123 pages

Yamaha RX-V1600 User Manual - Dutch - 123 pages

Yamaha RX-V1600 User Manual - French - 123 pages

Yamaha RX-V1600 User Manual - Italian - 123 pages

Yamaha RX-V1600 User Manual - Swedish - 123 pages

Yamaha RX-V1600 User Manual - Spanish - 123 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info