34
Adjustment of DELAY TIME
You can adjust the time difference between the beginning of
the source sound and the beginning of the effect sound.
This adjustment can be made to all programs individually.
By applying more or less delay, sound effects, background
noise, and ambient noise coming at you from the rear speakers
can be enhanced or subdued for extra effect.
1. PRO LOGIC : from 15 to 30 milliseconds
(Preset value: 20 milliseconds)
2. PRO LOGIC : from 15 to 30 milliseconds
ENHANCED (Preset value: 20 milliseconds)
3. CONCERT VIDEO : from 1 to 100 milliseconds
(Preset value: 28 milliseconds)
4. MONO MOVIE : from 1 to 100 milliseconds
(Preset value: 20 milliseconds)
5. ROCK CONCERT : from 1 to 100 milliseconds
(Preset value: 17 milliseconds)
6. CONCERT HALL : from 1 to 100 milliseconds
(Preset value: 30 milliseconds)
1 Press once or more so that “DELAY” appears on the
display.
2 By continuously pressing the “+” or “–” side of the LEVEL
key, the value changes continuously.
The value stops changing momentarily at the preset point.
Notes
●
Adding too much delay will cause an unnatural effect with
some sources.
●
When the LEVEL key is pressed, sound is momentarily
interrupted.
Note
The values of the delay time, center level and rear level you set
the last time will remain memorized even when the power of
this unit is off.
However, if the power cord is kept disconnected for more than
one week, these values will be automatically changed back to
the original factory settings.
