The Bluetooth function of the unit is disabled.Enable the Bluetooth function (p.120).
Another Bluetooth device is already connected to the unit.Terminate the current Bluetooth connection and then establish a new connection (p.73).
The unit and the Bluetooth device are too far apart.Move the Bluetooth device closer to the unit.
There is a device (such as microwave oven and wireless LAN) that
outputs signals in the 2.4 GHz frequency band nearby.
Move the unit away from those devices.
The Bluetooth device does not support A2DP.Use a Bluetooth device that supports A2DP.
The connection information registered on the Bluetooth device is not
working for some reason.
Delete the connection information on the Bluetooth device, and then establish a
connection between the Bluetooth device and the unit again (p.73).
No sound is produced, or the sound is interrupted
during playback.
The volume of the Bluetooth device is set too low.Turn up the volume of the Bluetooth device.
The Bluetooth device is not set to send audio signals to the unit.Switch the audio output of the Bluetooth device to the unit.
The Bluetooth connection has been terminated.
Establish a Bluetooth connection between the Bluetooth device and the unit again
(p.73).
The unit and the Bluetooth device are too far apart.Move the Bluetooth device closer to the unit.
There is a device (such as microwave oven and wireless LAN) that
outputs signals in the 2.4 GHz frequency band nearby.
Move the unit away from those devices.
ProblemCauseRemedy
The unit does not detect the USB device.
The USB device is not connected to the USB jack securely.Turn off the unit, reconnect your USB device, and turn the unit on again.
The file system of the USB device is not FAT16 or FAT32.Use a USB device with FAT16 or FAT32 format.
Folders and files in the USB device cannot be viewed.The data in the USB device is protected by the encryption.Use a USB device without an encryption function.
The network feature does not function.The network parameters (IP address) have not been obtained properly.
Enable the DHCP server function on your router and set “DHCP” in the “Setup” menu to
“On” on the unit (p.118). If you want to configure the network parameters manually,
check that you are using an IP address which is not used by other network devices in
your network (p.118).
The unit cannot connect to the Internet via a wireless
router (access point).
The wireless router (access point) is turned off.Turn on the wireless router.
The unit and the wireless router (access point) are too far apart.Place the unit and the wireless router (access point) closer to each other.
There is an obstacle between the unit and the wireless router (access
point).
Move the unit and the wireless router (access point) in a location where there are no
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha RX-A860 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha RX-A860 in the language / languages: English as an attachment in your email.
The manual is 16,73 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
