Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
If you use five speakers in the front side, use two of them as front surround speakers (*1) or presence speakers (*2). We recommend using them as front surround speakers for
enjoying unprocessed playback (p.58) or presence speakers for enjoying stereoscopic sound fields (p.55).
•For information on the ideal speaker layout, see “Ideal speaker layout” (p.133).
•If you have seven speakers, use two of them as surround back speakers or presence speakers.
To reinforce the rear left/right sounds, use them as surround back speakers.
To create a natural 3-dimensional sound field, use them as presence speakers.
•Two subwoofers connected to the unit output the same sounds.
1Placing speakers
Caution
•Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 MIN”. In this case, you can also use 4-ohm speakers as the front speakers.
For details, see “Setting the speaker impedance” (p.19).
Speaker typeAbbr.Function
Speaker system (the number of channels)
7.1+27.17.16.15.1
Front
5.1
4.13.12.1
Front (L)1
Produce front left/right channel sounds (stereo sounds).
●●●●●●●●●
Front (R)2●●●●●●●●●
Center 3Produces center channel sounds (such as movie dialogue and vocals).●●●●●●●
Surround (L)4
Produce surround left/right channel sounds. Surround speakers also produce surround back channel
sounds when no surround back speakers are connected.
●●●●●
*
1
●
Surround (R)5●●●●●
*
1
●
Surround back (L)6
Produce surround back left/right channel sounds.
●●
Surround back (R)7●●
Surround back8Produces sounds mixed from surround back left/right channel sounds.●
Presence (L)E
Produce CINEMA DSP effect sounds. In combination with CINEMA DSP 3D (p.55), the presence speakers
create a natural 3-dimensional sound field in your room.
●●
*
2
Presence (R)R●●
*
2
Subwoofer9
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
This channel is counted as “0.1”. You can connect 2 subwoofers (with built-in amplifier) to the unit.
●●●●●●●●●
About Dolby Atmos
®
(RX-A850 only)
•The unit supports the surround technology “Dolby Atmos”. To get the most from Dolby Atmos
contents on the unit, refer to “Dolby Atmos (RX-A850 only)” (p.142) to lay out the speakers and
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha RX-A750 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha RX-A750 in the language / languages: English as an attachment in your email.
The manual is 18,64 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
