549962
117
Zoom out
Zoom in
Previous page
1/141
Next page
APPENDIX Troubleshooting En 117
Audio
The unit cannot be controlled using the remote
control.
The unit is out of the operating range. Use the remote control within the operating range (p.5).
The batteries are weak. Replace with new batteries.
The unit’s remote control sensor is exposed to direct sunlight or
strong lighting.
Adjust the lighting angle, or reposition the unit.
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control (p.111).
The MHL-compatible mobile device cannot be
controlled using the remote control.
The mobile device or its application is not externally controllable. Directly operate the mobile device itself.
Problem Cause Remedy
Problem Cause Remedy
No sound.
Another input source is selected. Select an appropriate input source with the input selection keys.
Signals that the unit cannot reproduce are being input.
Some digital audio formats cannot be played back on the unit. To check the audio
format of the input signal, use “Audio Signal” in the “Information” menu (p.109).
The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable.
The volume cannot be increased.
The maximum volume is set. Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.99).
A device connected to the output jacks of the unit is not turned on. Turn on all devices connected to the output jacks of the unit.
No sound is coming from a specific speaker.
The playback source does not contain a signal for the channel. To check it, use “Audio Signal” in the “Information” menu (p.109).
The currently selected sound program/decoder does not use the
speaker.
To check it, use “Test Tone” in the “Setup” menu (p.98).
Audio output of the speaker is disabled.
Perform “Auto Setup” (p.32) or use “Configuration” in the “Setup” menu to change
the speaker settings (p.95).
The volume of the speaker is set too low.
Perform “Auto Setup” (p.32) or use “Level” in the “Setup” menu to adjust the
speaker volume (p.97).
The speaker cable connecting the unit and the speaker is
defective.
If there is no problem with the connection, replace with another speaker cable.
The speaker is malfunctioning.
To check it, replace with another speaker. If the problem persists, the unit may be
malfunctioning.
No sound is coming from the surround back
speaker.
The extended surround is disabled.
Use “Extended Surround” in the “Setup” menu to select a decoder to be used
(p.99).
No sound is coming from the subwoofer.
The playback source does not contain LFE or low-frequency
signals.
To check if the subwoofer is working properly, use “Test Tone” in the “Setup” menu
(p.98).
Subwoofer output is disabled.
Perform “Auto Setup” (p.32) or set “Subwoofer” in the “Setup” menu to “Use”
(p.96).
The volume of the subwoofer is too low. Adjust the volume on the subwoofer.
The subwoofer has been turned off by its auto-standby function. Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-A740 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-A740 in the language / languages: English as an attachment in your email.

The manual is 17,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-A740

Yamaha RX-A740 Installation Guide - English - 2 pages

Yamaha RX-A740 Quick start guide - English - 2 pages

Yamaha RX-A740 Installation Guide - German - 2 pages

Yamaha RX-A740 User Manual - German - 141 pages

Yamaha RX-A740 Installation Guide - Dutch - 2 pages

Yamaha RX-A740 User Manual - Dutch - 141 pages

Yamaha RX-A740 Installation Guide - French - 2 pages

Yamaha RX-A740 User Manual - French - 141 pages

Yamaha RX-A740 Installation Guide - Italian - 2 pages

Yamaha RX-A740 User Manual - Swedish - 141 pages

Yamaha RX-A740 Installation Guide - Spanish - 2 pages

Yamaha RX-A740 User Manual - Spanish - 141 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info