707149
159
Zoom out
Zoom in
Previous page
1/192
Next page
En 159
ADVANCED SETUP menu items
X
Default settings are underlined.
Changing the speaker impedance setting (SPEAKER IMP.)
Change the unit’s speaker impedance settings depending on the impedance of the speakers
connected.
Settings
Turning on/off the remote control sensor
(REMOTE SENSOR)
Turn on/off the remote control sensor on the main unit. While the remote control sensor is
turned off, you cannot control the unit from the remote control.
Settings
Selecting the remote control ID (REMOTE ID)
Change the unit’s remote control ID so that it matches the remote control’s ID (default: ID1).
When using multiple Yamaha AV receivers, you can set each remote control with a unique
remote control ID for its corresponding receiver.
Settings
ID1
, ID2
Changing the remote control ID of the remote control
1
To select ID1, hold down the cursor key (e) and SCENE1 together for 5 seconds.
To select ID2, hold down the cursor key (e) and SCENE2 together for 5 seconds.
X
If the remote control ID does not match that of the unit, “RemID Mismatch” appears on the unit’s front
display when the remote control is operated.
Item Function Page
SPEAKER IMP. Changes the speaker impedance setting. 159
REMOTE SENSOR Turns on/off of the remote control sensor on the main unit. 159
REMOTE ID Selects the unit’s remote control ID. 159
TUNER FRQ STEP
(Brazil, Asia and General models only)
Changes the FM/AM tuning frequency setting.
160
TV FORMAT Switches the video signal type. 160
MONITOR CHECK Removes the limitation on HDMI video output. 160
4K MODE Selects the HDMI 4K (60 Hz/50 Hz) signal format. 161
DTS MODE Switches the DTS format notification setting. 161
BACKUP/RESTORE
Creates backup of the settings of the unit, or recovers the settings from
the backup.
161
INITIALIZE Restores the default settings. 162
FIRM. UPDATE Updates the firmware. 162
VERSION Checks the version of firmware currently installed on the unit. 162
6 Ω MIN
Select this option when you connect 6-ohm speakers to the unit. You can also use
4-ohm speakers as the front speakers.
8 Ω MIN
Select this option when you connect 8-ohm or higher speakers to the unit.
8¬MIN
SPEAKER¡IMP.
ON Turns on the remote control sensor.
OFF Turns off the remote control sensor.
ON
REMOTE SENSOR
ID1
REMOTE ID
159


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-A3080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-A3080 in the language / languages: English as an attachment in your email.

The manual is 8,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-A3080

Yamaha RX-A3080 User Manual - German - 192 pages

Yamaha RX-A3080 User Manual - Dutch - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info