707149
127
Zoom out
Zoom in
Previous page
1/192
Next page
En 127
Sound
Information Displays information about the current audio signal. 136
Lipsync
Delay Enable Enables/disables the “Lipsync” adjustment configured in “Auto/Manual Select” in the “Setup” menu. 136
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 136
Adjustment Adjusts the delay between video and audio output manually. 137
DSP Parameter
DSP Level Adjusts the sound field effect level. 137
Initial Delay Adjusts the delay between the direct sound and presence sound field generation. 137
Room Size Adjusts the broadening effect of the presence sound field. 137
Liveness Adjusts the loss of the presence sound field. 137
Reverb Time Adjusts the decay time of the rear reverberant sound. 137
Reverb Delay Adjusts the delay between the direct sound and reverberant sound generation. 138
Reverb Level Adjusts the volume of the reverberant sound. 138
Surround Initial Delay Adjusts the delay between the direct sound and surround sound field generation. 138
Surround Room Size Adjusts the broadening effect of the surround sound field. 138
Surround Liveness Adjusts the loss of the surround sound field. 138
Surround Back Initial Delay Adjusts the delay between the direct sound and surround back sound field generation. 138
Surround Back Room Size Adjusts the broadening effect of the surround back sound field. 138
Surround Back Liveness Adjusts the loss of the surround back sound field. 139
Surround Decoder
Decode Type Selects a surround decoder to be used. 139
Center Spread Selects whether to spread the center channel signals to left and right when 2-channel source is played. 139
Center Image Adjusts the center localization (broadening effect) of the front sound field. 139
9ch Stereo
Level Adjusts the entire volume. 139
Front / Rear Balance Adjusts the front and rear volume balance. 139
Left / Right Balance Adjusts the left and right volume balance. 139
Height Balance Adjusts the height volume balance using the presence speakers. 139
Monaural Mix Enables/disables monaural sound output. 140
Reset Restores all default settings. 140
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 140
Volume
Max Volume Sets the limit value of the volume. 140
Initial Volume Sets the initial volume for when this receiver is turned on. 140
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 140
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP 3D effect level when the volume is adjusted. 140
Virtual Speaker
VPS Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers. 141
VSBS Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. 141
Ultra Low Jitter PLL Mode (RX-A3080 only) Enables/disables the jitter elimination function. 141
DAC Digital Filter (RX-A3080 only) Selects the digital filter type of the audio DAC (digital-to-analog converter). 141
Balance Input Attenuator (RX-A3080 only) Selects whether to activate the attenuator for the balance input to avoid sound distortion. 141
Menu Item Function Page
127


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-A3080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-A3080 in the language / languages: English as an attachment in your email.

The manual is 8,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-A3080

Yamaha RX-A3080 User Manual - German - 192 pages

Yamaha RX-A3080 User Manual - Dutch - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info